Installation guide

Chapter 6. Redundant Storage Subsystem & Multipathing I/O
153
6.3.2 Register Microsoft MPIO devices
Extract “mpio_driver_dual” to a folder (eg. mpio). Rename “amdsm.inf”, such as
“test.inf”. In “mpio” folder, create a text file (eg. test.txt) and add the vendor
name and product name of MPIO devices in it then must press “ENTER” to the
next line.
The default value of the vendor name is 8 characters and the product name is
16 characters.
If the vendor name or the product name is shorter than default, fulfill it with
blank, such as”Y3-16 AXS-VOL#000”.
Open “command prompt” to register the MPIO devices. Type “ainf test.inf
test.txt amdsm.inf”.