Installation guide

Chapter 5. McBIOS & Terminal Configuration
131
the beeper off temporarily. The beeper will still activate on the next event.
5.5.5.2 Alert Beeper Setting
The “Alert Beeper Setting” function item is used to “Disabled” or “Enabled” the
RAID subsystem alarm tone generator. Select “Disabled” and press the Enter
key in the dialog box to turn the beeper off.
5.5.5.3 Change Password
The manufacture default password is set to 0000. The password option allows
user to set or clear the password protection feature. Once the password has
been set, the user can monitor and configure the controller only by providing the
correct password. This feature is used to protect the internal RAID system from
unauthorized access. The controller will check the password only when entering
the main menu from the initial screen. The system will automatically go back to
the initial screen if it does not receive any command in 5 minutes.