Installation guide

Software Operation Manual
130
5.5.4.6 Identify Enclosure
To prevent removing the wrong subsystem, the selected expander subsystem
all disks fault LED Indicator will light for physically locating the selected
subsystem when the “Identify Enclosure” is selected. This function will also light
the subsystem LED indicator, if it is existed.
5.5.5 Raid System Function
To set the “Raid System Function”, move the cursor bar to the main menu and
select the “Raid System Function” item and then press Enter key. The “Raid
System Function” menu will show multiple items. Move the cursor bar to an item,
then press Enter key to select the desired function.
5.5.5.1 Mute the Alert Beeper
The “Mute the Alert Beeper” function item is used to control the RAID
subsystem Beeper. Select Yes and press the Enter key in the dialog box to turn