Installation guide

Chapter 5. McBIOS & Terminal Configuration
123
Note
RAID level 30 50 and 60 can support up to eight RAID set.
5.5.3.2 Create Raid 30/50/60
To create 30/50/60 volume set from RAID set group, move the cursor bar to the
main menu and click on the “Create Raid30/50/60” link. The “Select the Raid
Set to Create Volume on It” screen will show all RAID set number. Tick on the
RAID set numbers (same disk No per RAID set) that you want to create and
then click on it.
The created new volume set attribute option allows users to select the Volume
Name, Capacity, Raid Level, Strip Size, SAS Port#/LUN Base/LUN, Cache
Mode, and Tagged Command Queuing. The detailed description of those
parameters can refer to section 5.5.3.1. User can modify the default values in
this screen; the modification procedures are in section 5.5.3.4.
5.5.3.3 Delete Volume Set
To delete volume set from a RAID set, move the cursor bar to the “Volume Set
Functions” menu and select the “Delete Volume Set” item, then press the Enter
key. The “Volume Set Functions” menu will show all Raid Set # items. Move the
cursor bar to a RAID set number, then press the Enter key to show all volume
sets within that RAID set. Move the cursor to the volume set number that is to be
deleted and press the Enter to delete it.