Installation guide

Chapter 5. McBIOS & Terminal Configuration
109
capacity can be utilized by one or more volume sets. The volume sets
associated with this RAID set appear for you to have chance to modify RAID
level or stripe size. Follow the instruction presented in the “Modify Volume
Set ”to modify the volume sets; Operation system specific utilities may be
required to expand operating system partitions.
Note
1. Once the “Expand Raid Set” process has started, user can not
stop it. The process must be completed.
2. If a disk drive fails during RAID set expansion and a hot spare
is available, an auto rebuild operation will occur after the RAID
set expansion completes.
3. RAID 30/50/60 doesn't support the "Expand Raid Set".
5.5.2.3.1 Migrating
Migration occurs when a disk is added to a RAID set. Migrating state is
displayed in the RAID state area of “The Raid Set Information” screen when a
disk is being added to a RAID set. Migrating state is also displayed in the
associated volume state area of the “Volume Set Information” which belongs
this RAID set.