Installation guide

Software Operation Manual
108
Note
1. You only can edit the Raid set name in "Create Raid Set".
2. To create RAID 30/50/60 volume, you need to create multiple
RAID sets first with the same disk members on each RAID set. The
max no. disk drives per volume set: 32 for RAID 0/1/10(1E)/3/5/6
and 122 for RAID 30/50/60.
5.5.2.2 Delete Raid Set
To completely erase and reconfigure a RAID set, you must first delete it and
re-create the RAID set. To delete a RAID set, select the RAID set number that
you want to delete in the “Select Raid Set To Delete” screen. Then “Delete Raid
Set” dialog box will appear, press the Yes to delete it. Warning, data on RAID set
will be lost if this option is used. But for deleting RAID set with the Raid 30/50/60
volume, firstly, you need to delete the volumes belong to those RAID sets.
5.5.2.3 Expand Raid Set
Instead of deleting a RAID set and recreating it with additional disk drives, the
“Expand Raid Set” function allows the users to add disk drives to the RAID set
that have already been created.
To expand a RAID set:
Select the “Expand Raid Set” option. If there is an available disk, then the
“Select SATA Drives for Raid Set Expansion” screen appears.
Select the target RAID set by clicking on the appropriate radio button. Select the
target disk by clicking on the appropriate check box.
Press the Yes key to start the expansion on the RAID set. The new additional