Installation guide

Software Operation Manual
106
Press Yes key in the “Create Vol/Raid Set” dialog box, the RAID set and volume
set will start to initialize it. Select “Foreground (Faster Completion)” or “Back-
ground (Instant Available)” for initialization and “No Init (To Rescue Volume)” for
recovering the missing RAID set configuration
5.5.2 Raid Set Function
Manual configuration gives complete control of the RAID set setting, but it will
take longer to configure than “Quick Volume/Raid Setup” configuration. Select
“Raid Set Function” to manually configure the RAID set for the first time or
delete existing RAID sets and reconfigure the RAID set.
5.5.2.1 Create Raid Set
The following is the RAID set features for the RAID subsystem.
1. Up to 32 disk drives can be included in a single RAID set.
2. Up to 128 RAID sets can be created per controller. RAID level 30 50 and 60
can support up to eight sub-volumes (RAID set).
To define a RAID set, follow the procedures below:
1. Select “Raid Set Function” from the main menu.
2. Select “Create Raid Set “ from the “Raid Set Function” dialog box.
3. A “Select Drive For Raid Set” window is displayed showing the SAS/SATA
drives connected to the current controller.
Press the UP and DOWN arrow keys to select specific physical drives. Press
the Enter key to associate the selected physical drive with the current RAID set.
Repeat this step; the user can add as many disk drives as are available to a
single RAID set.