Installation guide

Software Operation Manual
104
during the configuration process.
3. When a single volume set is created, it can consume all or a portion of the
available disk capacity available in this RAID set.
4. If you need to add additional volume set, use the main menu “Create Volume
Set” function.
The total number of physical drives in a specific RAID set determine the RAID
levels that can be implemented within the RAID set. Select “Quick Volume/Raid
Setup” from the main menu; all possible RAID level will be displayed on the
screen.
If volume capacity exceed 2TB, controller will show the “Greater Two TB Volume
Support” sub-menu.
 No
It keeps the volume size with max. 2TB limitation.
 Use 64bit LBA
This option uses 16 bytes CDB instead of 10 bytes. The maximum volume capacity
up to 512TB.
This option works on different OS which supports 16 bytes CDB.
Such as: Windows 2003 with SP1 or later Linux kernel 2.6.x or later
 Use 4K Block
This option works under Windows platform only. And it can not be converted to
“Dynamic Disk”, because 4k sector size is not a standard format.