Installation guide

Chapter 5. McBIOS & Terminal Configuration
103
Option Description
Quick Volume/Raid Setup
Create a default configurations which are based on
the number of physical disk installed
Raid Set Functions Create a customized RAID set
Volume Set Functions Create a customized volume set
Physical Drive Functions View individual disk information
Raid System Function Setting the RAID system configurations
Hdd Power Management Setting Hdd power management function
Fibre Channel Config (only
for FC)
To set the Fibre channel config function
In Band SAS Config (only
for SAS)
In Band management configuration
Ethernet Configuration LAN port Setting
Views System Events Record all system events in the buffer
Clear Event Buffer Clear all event buffer information
Hardware Monitor Show all system environment status
System Information View the controller information
This password option allows user to set or clear the RAID subsystem’s
password protection feature. Once the password has been set, the user can
only monitor and configure the RAID subsystem by providing the correct
password. The password is used to protect the internal RAID subsystem from
unauthorized entry. The controller will prompt for the password only when
entering the main menu from the initial screen. The RAID subsystem will
automatically return to the initial screen when it does not receive any command
in five minutes.
5.5.1 Quick Volume/Raid Setup
“Quick Volume/RAID Setup” is the fastest way to prepare a RAID set and
volume set. It requires only a few keystrokes to complete. Although disk drives
of different capacity may be used in the RAID Set, it will use the capacity of the
smallest disk drive as the capacity of all disk drives in the RAID Set. The “Quick
Volume/RAID Setup” option creates a RAID set with the following properties:
1. All of the physical disk drives are contained in one RAID set.
2. The RAID levels, hot spare, capacity, and stripe size option are selected