User's Guide

Set Up
Set Up - First-Time YoLink Users (Exisng users proceed to Add Device, next page)
* Get ready: your W LeakTo set up and use ater Sensor 2, you will need an Apple iPhone or tablet that is iOS 9.0 or higher, or an Android phone
or tablet that is Android 4.4 or higher
Follow the steps below to set up your Water Leak Sensor 2 via the YoLink app
Download YoLink app through Apple App Store or Google Play Store
Log in or create a new account if required
Download, and log
in to YoLink app
1
* Make sure your hub is connected to the
internet (green LED indicator is
blinking, blue LED indicator is
always on)
Set up YoLink Hub
2
YoLink Hub is required to set up your Water Leak Sensor 2. Please set up your YoLink Hub rst
(refer to YoLink Hub manual)
* Ethernet patch cable (included) to your network
(router, switch, etc.), recommended, but oponal.
Otherwise connect your Hub to your home Wi-Fi
network. Refer to the Hub set up manual for more
informaon:
YS1603-UC_User Guide
5
Power
Adapter
Hub
S
ET