User's Guide

2
Hold the SET button on the Gas/Water
Valve Controller for 5-10 seconds, until
the green light blinks quickly
Close the valve
* Verify the valve is shown to be Closed
on the YoLink app, or press the SET buon
on the controller if it is shown as Open
Hold the SET button for 5-10 seconds,
until the green light blinks quickly
1
SET Buon
* Refer to the Gas/Water Valve Controller
manual for more informaon:
YS4909-UC_Gas/Water
Valve Controller
SET Buon
* If you want to open the valve when the gas/water
sensor alerts (either water detected warning or low water
level warning), open the valve first, and let the gas/water
controller enter pairing mode
24