User's Guide

YoLink Control
YoLink Control is our unique “device to device” control technology. Under YoLink Control,
the devices can be controlled without internet or Hub. Devices which send out command
is called controller(Master). Devices which receive command and act accordingly is
called responder(Receiver).
You will need to set it up physically.
F i n d a s e n s o r a s c o n t r o l l e r ( M a s t e r ) .
Hold the set button for 5-10 seconds, the device
will enter pairing mode.
After pairing is done, the light will stop flashing.
Find a Gas/Water Valve as responder(Receiver).
Hold the set button for 5-10 seconds, the light
will flash green quickly.
When the sensor alerts, the Gas/Water Valve
will turn off as well.
Pairing
SET
Gas/ Water Valve
Model : YS4 907 -U C
Power : DC1 2V- 1.5 A
SET BUTTON
15