User's Guide

Installation
Note
Hold the mounting lug of the Valve with 2 brackets, and lock them with screws.
Pass the stainless steel throat through the bracket, then fix it on the water pipe valve and
adjust the position.
Plug in and power on the device.
Use the included adapter.
The center axis of the manipulator must be aligned with the center axis of the water pipe
valve and the corresponding screw is locked.
The Valve should not be close to the wall and should be installed more than 20mm from
the wall.
The Valve should be installed on the original main water pipe/gas valve.
The Valve should be installed in a position that is convenient for manual operation.
The Valve should be as far away as possible from the fire source.
8