SDS
level that contributes to the hazard classification of the mixture) which have an exposure
limit applicable in the region for which this safety data sheet is intended or other
recommended limit. At this time, the other relevant constituents have no known exposure
limits from the sources listed here.
Chemical name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Copper 7440-50-8
TWA: 0.2 mg/m
3
fume
TWA: 0.1 mg/m
3
fume
TWA: 1 mg/m
3
dust and mist
(vacated) TWA: 0.1 mg/m
3
Cu dust,
fume, mist
IDLH: 100 mg/m
3
dust, fume
and mist
TWA: 1 mg/m
3
dust and mist
TWA: 0.1 mg/m
3
fume
Aluminum 7429-
90-5
TWA: 1 mg/m
3
respirable
particulate matter
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable fraction (vacated)
TWA: 15 mg/m
3
total dust(vacated)
TWA: 5 mg/m
3
respirable fraction
TWA: 10 mg/m
3
total
dust TWA: 5 mg/m
3
respirable dust
Phosphate(1-), hexafluoro-,
lithium
21324-40-3
TWA: 2.5 mg/m
3
F
TWA: 2.5 mg/m
3
F (vacated)
TWA: 2.5 mg/m
3
IDLH: 250 mg/m
3
F
Chemical name
Alberta
British Columbia
Ontario TWAEV
Quebec
Copper 7440-50-
8
TWA: 0.2 mg/m
3
TWA: 1 mg/m
3
TWA: 1 mg/m
3
TWA: 0.2 mg/m
3
TWA: 0.2 mg/m
3
TWA: 1 mg/m
3
TWA: 0.2 mg/m
3
TWA: 1 mg/m
3
Aluminum 7429-
90-5
TWA: 10 mg/m
3
TWA: 1.0 mg/m
3
TWA: 1 mg/m
3
TWA: 10 mg/m
3
Phosphate(1-),
hexafluoro-, lithium
21324-40-3
TWA: 2.5 mg/m
3
TWA: 2.5 mg/m
3
TWA: 2.5 mg/m
3
TWA: 2.5 mg/m
3
Other Exposure Guidelines Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962 (11th
Cir., 1992).
Appropriate engineering controls
Engineering controls Showers
Eyewash stations
Ventilation systems.
Individual protection measures, such as personal protective equipment
Eye/face protection If splashes are likely to occur, wear safety glasses with side-shields.
Hand protection Wear suitable gloves. Impervious gloves.
Skin and body protection Wear suitable protective clothing. Long sleeved clothing.
Respiratory protection No protective equipment is needed under normal use conditions. If exposure limits are exceeded or
irritation is experienced, ventilation and evacuation may be required.
General hygiene considerations Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or
smoke when using this product. Wash hands before breaks and immediately after handling
the product. Wear suitable gloves and eye/face protection. Avoid contact with skin, eyes or
clothing.