User Guide

Appendix A - Troubleshooting Guide 33
2. Check the following (Windows NT (or later)): Disable the library drivers in the Device Manager
screen. Sometimes these drivers conflict with the Yosemite Backup drivers.
NetWare
1. Make sure NWASPI.CDM is loaded (see Using NWASPI.CDM). If this does not work, remove the
NWTAPE.CDM command from the STARTUP.NCF file.
2. Remove the NWTAPE.CDM command from the STARTUP.NCF file.
3. Run YTSCSI.NLM from the command line to force a scan of all SCSI devices. If this works, you
should add this command to the STARTUP.NCF file.
Linux
Refer to SCSI Libraries may not be detected.