Owner's Manual

3
Built-In Two Channel Mixer
1. Mic In
AnydynamicmicrophonecanbeconnectedtotheMicinput.Condensermicrophoneswillrequirean
externalpowersupply.
2. Mic Level
TheMicLevelcontroladjuststhevolumeleveloftheMicinput.Themicrophonesignaloutputtoother
cabinetsthroughthelinkconnectionswillbeaffectedaswell.
3. Line In
TheLineinputsallowlinelevelsourcessuchasportablemusicplayersandkeyboardstobeconnected.
TheseRCAinputsaresummedtoallowtheblendingofstereosourcesintomono.The¼-inchinputis
alsobalancedtohelprejecthum(whenusedwithbalancedcables).Thisinputmaybeusedtoallow
operationfromlower-levelLineinputs(asopposedtotheLinkjacks).
4. Line Level
TheLinecontroladjuststhevolumelevelofdevicespluggedintothe¼-inchandRCAlineinputs.
Thesignaloutfromthisdevice,throughthelinkconnections,toothercabinetswillbeaffectedas
well.Aline-levelsignalandmicrophoneconnectedsimultaneouslywillbeelectronicallysummed
allowingbothtoworktogether.
5. Mixer Defeat
TheMixerDefeatswitchdisablestheonboardmixerontheParasourceenclosure.Forbestnoise
performancewhentheParasourceenclosure’smixerisnotbeinguse,settheswitchtodefeat.
*Note: Parasource enclosures have been designed to connect multiple Parasource enclosures via the
Inputs and Link Outputs. When linking the Parasource enclosures, a maximum of 3 of internal mixers
can be used (enabled) allowing up to 3 microphones and 3 line sources to be mixed without the need
of an external mixer. This is useful for smaller music engagements, meetings, seminars, etc..
1
8
6 1
1
1
2
7
5
8
4
9
3