User's Manual

ManualsBrandsYork ManualsOtherTCHD18

TECHNICAL GUIDE

HORIZONTAL DISCHARGE

AIR CONDITIONERS

13 SEER – R-410A

MODELS:

TCHD18 THRU 60

(1.5 THRU 5 NOMINAL TONS, 1 PHASE)

Due to continuous product improvement, specifications

are subject to change without notice.

Visit us on the web at www.york.com

Additional rating information can be found at

www.ahridirectory.org

WARRANTY

Standard 5-year limited parts warranty.

Standard 510-year limited compressor warranty.

Extended 10-year limited parts warranty when product is

registered online within 90 days of purchase for replace-

ment or closing for new home construction.

LISTED

556454-YTG-A-0210

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

The 13 SEER Series condensing unit is the outdoor part of a

versatile system of air conditioning. It is designed to be custom-

matched with one of UPG’s complete line of evaporator sec-

tions, with each serving a specific function. Matching Air Han-

dlers are available for upflow, downflow, or horizontal

applications to provide a complete system. Electric Heaters are

available, if required. Add-On coils are available for use with

upflow, downflow, or horizontal furnaces and air handlers.

FEATURES

• Performance - Efficiency levels from 13.0 SEER/11.5 EER

with a loose coil and up to 15.5 SEER/13.5 EER when cou-

pled with a variable speed indoor blower.

• Easy to Install - Compact “slim-line” design allows for easy

installation in tight spaces. Units can be stacked.

• Lower Installation Cost - Installation time and costs are

reduced by easy power and control wiring connections. The

unit contains enough refrigerant for matching indoor coils

and 15 feet of interconnecting piping.

• Quiet Operation - Levels as low as 67 dBA. High efficiency

scroll compressor and swept wing fan design reducing oper-

ating sound to a mere whisper.

• State Of The Art Coil Technology - Micro-channel (MC2)

aluminum coil technology provides enhanced capacities and

efficiencies plus the benefit of maximum corrosion protection

especially in coastal applications (up to 7 times greater cor-

rosion resistance than conventional copper tube and alumi-

num fin coils).

• Compressor Protection - The compressor is internally pro-

tected against high pressure and temperature. This is

accomplished by the simultaneous operation of high pres-

sure relief valve and a temperature sensor which protects the

compressor if undesirable operating conditions occur. A liq-

uid line filter-drier further protects the compressor.

• Durable Cabinet - Heavy-gage steel cabinet and a tubular

base rail provide added support.

• Durable Finish - Automotive quality finish provides the ulti-

mate protection from harmful U.V. rays and rust creep ensur-

ing long-lasting high quality appearance. A powder-paint

topcoat is applied over a baked-on primer, using a galva-

nized, zinc coated steel base material. The result is a finish

that has been proven in testing to provide 33% greater dura-

bility than conventional powder-coat finishes.

• Aesthetic - Powder paint “Champagne” Color provides an

attractive retail finish.

• Low Maintenance - Long life permanently lubricated motor-

bearings need no annual servicing.

• Easy Service Access - Fully exposed refrigerant connec-

tions and a single panel covering the electrical controls make

for easy servicing of the unit.

• Secured Service Valve - Secured re-usable service valves

are provided on both the liquid and vapor sweat connections

for ease of evacuating and charging.

• Other Features:

- Factory supplied filter drier

- High pressure switch, low pressure switch

- Accumulator and crankcase heater in all sizes

- Up to 200’ line set out of the box

- Zero lot line clearances (6” clearance in either direction)

• Agency Listed -

U.L. and C.U.L. listed - approved for out-

door application. The unit is certified in accordance with the

Unitary Small Equipment certification program, which is

based on ARI Standard 210/240.

Summary of content (28 pages)

PAGE 1
556454-YTG-A-0210 DESCRIPTION The 13 SEER Series condensing unit is the outdoor part of a versatile system of air conditioning. It is designed to be custommatched with one of UPG’s complete line of evaporator sections, with each serving a specific function. Matching Air Handlers are available for upflow, downflow, or horizontal applications to provide a complete system. Electric Heaters are available, if required.
PAGE 2
556454-YTG-A-0210 Physical and Electrical Data TCHD18 S41S3 MODEL TCHD24 S41S3 Unit Supply Voltage TCHD36 S41S3 TCHD48 S41S3 TCHD60 S41S3 208-230V, 1 60Hz Normal Voltage Range 1 187 to 252 Minimum Circuit Ampacity Max. Overcurrent Device Amps Min. Overcurrent Device Amps 2 3 Multi-Stage Compressor 11.8 17.4 17.5 23.1 27.1 34.3 20 30 30 40 45 60 15 20 20 25 30 35 No No No No No No Scroll Scroll Scroll Scroll Scroll Scroll Rated Load 9.0 13.5 12.8 17.3 20.
PAGE 3
556454-YTG-A-0210 System Charge for Various Matched Systems Outdoor Unit Required Orifice or TXV 1 TCHD18S41S3 TCHD24S41S3 TCHD30S41S3 TCHD36S41S3 TCHD48S41S3 TCHD60S41S3 1TVM4F1 1TVM4F1 1TVM4G1 1TVM4G1 1TVM4J1 1TVM4K1 2 - 14 3-5 4-0 4-8 5-5 5-6 Factory Charge, lbs-oz Indoor Coil 2,3 Additional Charge, oz AHP24 – 2 – – – – AHP36 – – 16 12 – – AHP/SHP60 – – – – 11 – AHX18 0 0 – – – – AHX24 10 10 – – – – AHX30 13 14 10 – – – AHX36 – 20 16 12
PAGE 4
556454-YTG-A-0210 System Charge for Various Matched Systems (Continued) Outdoor Unit TCHD18S41S3 TCHD24S41S3 TCHD30S41S3 TCHD36S41S3 TCHD48S41S3 TCHD60S41S3 1TVM4F1 1TVM4F1 1TVM4G1 1TVM4G1 1TVM4J1 1TVM4K1 2 - 14 3-5 4-0 4-8 5-5 5-6 UC18 1 – – – – – UC24 5 5 – – – – UC30 5 5 3 – – – UC36 7 7 4 1 – – UC42 – 9 3 0 – – UC48 – 25 21 17 6 – UC60 – – – – 11 – Required Orifice or TXV Factory Charge, lbs-oz 1 Indoor Coil 2,3 Additional Charge, o
PAGE 5
56454-YTG-A-0210 COOLING CAPACITY - With Air Handler Coils UNIT MODEL TCHD18S41S3 TCHD24S41S3 TCHD30S41S3 TCHD36S41S3 TCHD48S41S3 TCHD60S41S3 TCHD18S41S3 TCHD24S41S3 TCHD30S41S3 TCHD36S41S3 TCHD48S41S3 TCHD60S41S3 AIR HANDLER MODEL W COIL MODEL1 RATED CFM COOLING NET MBH TOTAL SENS.
PAGE 6
556454-YTG-A-0210 COOLING CAPACITY - With Air Handler Coils (Continued) UNIT MODEL TCHD18S41S3 TCHD24S41S3 TCHD30S41S3 TCHD36S41S3 TCHD48S41S3 TCHD60S41S3 AIR HANDLER MODEL AHX18 AHX24 AHX30 F6FP018 F6FP024 F6FP030 AHP24 AHX18 AHX24 AHX30 AHX36 F*FP030 F6FP024 F6FP030 F6FP036 AHP36 AHX30 AHX36 AHX42 AHX48 F*FP030 F*FP036 F*FP040 F6FP030 F6FP036 F6FP042 F6FP048 AHP36 AHX36 AHX42 AHX48 AHX60 F*FP036 F*FP040 F*FP042 F5FP048 F6FP036 F6FP042 F6FP048 F6FP060 AHP/SHP60 AHX48 AHX60 F5FP048 F5FP060 F6FP048
PAGE 7
556454-YTG-A-0210 COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils FURNACE** UNIT MODEL TCHD18S41S3 TCHD24S41S3 TCHD30S41S3 COOLING CFM RANGE (Min.-max.) W COIL MODEL 450 - 750 14,17 450 - 750 14,17 450 - 750 NET MBH RATED CFM TOTAL SENS. FC/MC/PC24 600 18.0 FC/MC/PC30 600 18.0 14 FC/MC/PC32 600 450 - 750 17 FC/MC/PC35 450 - 750 14,17 FC/MC/PC36 450 - 750 14 FC/MC/PC37 SEER1 EER 12.6 13.00 11.00 12.6 13.00 11.00 18.1 12.6 13.00 11.
PAGE 8
556454-YTG-A-0210 COOLING CAPACITY - With High Efficiency Motor Furnaces UNIT MODEL TCHD18S41S3 FURNACE MODEL T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*
PAGE 9
556454-YTG-A-0210 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT MODEL TCHD18S41S3 TCHD24S41S3 FURNACE MODEL Y*9C*B12 Y*9C*C16 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*C16 Y*9C*C16 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*9X*
PAGE 10
556454-YTG-A-0210 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT MODEL TCHD24S41S3 FURNACE MODEL T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*B12 T*(8,L)X*C16 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*C16 T*9X*C16 T*9X*C20 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*(8,L)C
PAGE 11
556454-YTG-A-0210 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT MODEL TCHD24S41S3 TCHD30S41S3 FURNACE MODEL Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*B12 Y*9C*C16 Y*9C*C20 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*(8,L)C*C16 Y*9C*C16 T*(8,L)X*
PAGE 12
556454-YTG-A-0210 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT MODEL TCHD30S41S3 FURNACE MODEL T*(8,L)X*B12 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*(8,L)X*C20 T*9X*C16 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*C16 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,
PAGE 13
556454-YTG-A-0210 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT MODEL TCHD30S41S3 TCHD36S41S3 FURNACE MODEL Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*B12 Y*9C*C16 Y*9C*C20 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*
PAGE 14
556454-YTG-A-0210 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT MODEL TCHD36S41S3 FURNACE MODEL T*9X*D20 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*C20 T*9X*D20 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*C16 T*9X*C20 T*9X*D20 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*9C*B12
PAGE 15
556454-YTG-A-0210 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT MODEL TCHD36S41S3 TCHD48S41S3 FURNACE MODEL Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*9C*D20 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*B12 Y*9C*C16 Y*9C*C20 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*B12 Y*9C*C16 Y*9C*C20 Y*9C*D20 Y*(8,L)C*B12 Y*9C*B12 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*9C*D20 T*(8,L)X*C16 T*(8,L)X*C20
PAGE 16
556454-YTG-A-0210 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT MODEL TCHD48S41S3 TCHD60S41S3 FURNACE MODEL T*9X*D20 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*C16 T*9X*C20 T*9X*D20 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*9X*D20 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*9C*D20 Y*9C*D20 Y*9C*D20 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*9C*D20 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*9C*D20 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C20 Y*9C*D20 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*9C*C1
PAGE 17
556454-YTG-A-0210 ACCESSORIES Refer to Price Manual for specific model numbers. Hard Start Kit - Required when using TXV indoor coil. Also, provides increased starting torque for areas with low voltage. Thermostats - Compatible thermostat controls are available through accessory sourcing. For optimum performance and installation, refer to the UPGNET “Low Voltage Wiring Diagram” document to select and apply controls.
PAGE 18
556454-YTG-A-0210 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. TCHD18S41S3 INDOOR COIL MODEL NO. FC/MC/PC24 IDCFM 450 600 750 CONDENSING ENTERING AIR TEMPERATURE ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 17.3 18.2 18.6 19.7 21.5 18.9 19.0 19.2 20.6 22.5 20.4 19.7 19.8 21.5 23.4 65 S.C. 16.6 14.5 12.6 12.2 9.9 18.0 16.9 14.3 14.2 10.7 19.4 19.3 15.9 16.
PAGE 19
556454-YTG-A-0210 Furnaces Coils T.C. S.C. KW T*(8,L)X*A12 FC/MC/PC18A 0.98 0.98 0.94 T*(8,L)X*B12 FC/MC/PC18B 0.99 1.00 0.93 T*9X*B12 FC/MC/PC18B 0.99 1.02 0.93 T*(8,L)X*A12 FC/MC/PC24A 1.03 1.05 0.94 T*(8,L)X*B12 FC/MC/PC24B 1.02 1.04 0.94 T*9X*B12 FC/MC/PC24B 1.03 1.05 0.94 T*(8,L)X*A12 FC/MC/PC30A 1.03 1.05 0.94 T*(8,L)X*B12 FC/MC/PC30B 1.02 1.04 0.94 T*9X*B12 FC/MC/PC30B 1.03 1.05 0.94 T*(8,L)X*A12 FC/MC/PC32A 1.02 1.04 0.94 T*(8,L)X*A12 HD24 1.
PAGE 20
556454-YTG-A-0210 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. TCHD24S41S3 INDOOR COIL MODEL NO. FC/MC/PC24 IDCFM 600 800 1000 CONDENSING ENTERING AIR TEMPERATURE ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 19.8 23.1 22.5 24.9 29.0 22.4 23.8 23.6 25.9 29.9 25.0 24.6 24.8 27.0 30.9 65 S.C. 20.1 19.1 15.9 15.9 12.8 22.8 21.6 18.3 17.9 14.0 25.4 24.0 20.7 20.
PAGE 21
556454-YTG-A-0210 Furnaces T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*B12 T*(8,L)X*C16 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*C16 T*9X*C16 T*9X*C20 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*
PAGE 22
556454-YTG-A-0210 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. TCHD30S41S3 INDOOR COIL MODEL NO. FC/MC/PC35 IDCFM 800 1000 1200 CONDENSING ENTERING AIR TEMPERATURE ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 27.3 28.7 28.9 30.5 31.8 28.8 29.9 29.8 31.6 33.4 30.3 31.0 30.7 32.8 35.0 65 S.C. 26.6 24.5 20.7 20.5 15.9 28.2 27.4 23.2 22.6 17.2 29.7 30.4 25.7 24.
PAGE 23
556454-YTG-A-0210 Furnaces Coils T.C. S.C. KW T*(8,L)X*A12 FC/MC/PC30A 1.01 1.02 0.97 T*(8,L)X*B12 FC/MC/PC30B 0.99 0.98 0.93 T*9X*B12 FC/MC/PC30B 1.01 1.02 0.97 T*(8,L)X*A12 FC/MC/PC32A 1.00 1.00 0.98 T*(8,L)X*B12 FC/MC/PC35B 1.01 1.04 0.95 T*(8,L)X*C16 FC/MC/PC35C 1.01 1.04 0.94 T*(8,L)X*C20 FC/MC/PC35C 0.99 0.97 0.92 T*9X*B12 FC/MC/PC35B 1.01 1.03 0.95 T*9X*C16 FC/MC/PC35C 1.01 1.04 0.94 T*(8,L)X*A12 FC/MC/PC36A 1.01 1.00 0.
PAGE 24
556454-YTG-A-0210 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. INDOOR COIL MODEL NO. IDCFM CONDENSING ID DB (°F) ENTERING AIR TEMPERATURE ID WB (°F) T.C. 65 S.C. KW T.C. 75 S.C. KW T.C. 85 S.C. KW T.C. 95 S.C. KW T.C. 105 S.C. KW T.C. 115 S.C. KW T.C. 125 S.C. KW TCHD36S41S3 FC/MC/PC43 1000 80 80 75 57 62 62 35.8 36.0 34.9 33.1 30.4 25.3 1.91 1.92 1.90 34.4 34.5 32.9 31.6 29.4 24.4 2.32 2.30 2.30 33.0 33.0 30.9 30.2 28.4 23.5 2.73 2.67 2.70 31.6 31.5 28.9 28.8 27.3 22.6 3.14 3.05 3.10 30.1 29.6 27.
PAGE 25
556454-YTG-A-0210 Furnaces T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*9X*C16 T*9X*C20 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*C16 T*9X*C20 T*9X*D20 T*(8,L)X*A12 T*(8,L)X*B12 T*9X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*C20 T*9X*D20 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C20 T*9X*B12 T*
PAGE 26
556454-YTG-A-0210 COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. TCHD48S41S3 INDOOR COIL MODEL NO. FC/MC/PC48 CONDENSING ENTERING AIR TEMPERATURE IDCFM 1400 1600 1800 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 44.8 47.3 47.9 52.2 56.8 46.3 48.2 48.8 53.2 58.1 47.8 49.1 49.7 54.3 59.4 S.C. 45.5 40.3 34.7 34.4 26.8 47.1 42.9 36.8 36.7 28.0 48.6 45.5 38.9 39.0 29.
PAGE 27
556454-YTG-A-0210 Furnaces Coils T.C. S.C. KW T*(8,L)X*C16 FC/MC/PC48C 1.00 1.01 1.00 T*(8,L)X*C20 FC/MC/PC48C 1.01 1.02 0.99 T*9X*C16 T*9X*C20 T*9X*D20 FC/MC/PC48C FC/MC/PC48C FC/MC/PC48D 1.00 1.00 1.00 0.99 1.01 1.01 1.00 1.00 1.00 T*(8,L)X*C16 FC/PC60C 0.99 0.99 0.99 T*(8,L)X*C20 FC/PC60C 0.99 0.99 0.99 T*(8,L)X*C20 FC/MC/PC60D 0.99 0.99 0.99 T*9X*C16 FC/PC60C 0.97 0.99 0.99 T*9X*C20 FC/PC60C 0.97 0.99 0.99 T*9X*D20 FC/MC/PC60D 0.99 0.97 0.
PAGE 28
COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. INDOOR COIL MODEL NO. IDCFM CONDENSING ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 65 S.C. KW T.C. 75 S.C. KW T.C. 85 S.C. KW T.C. 95 S.C. KW T.C. 105 S.C. KW T.C. 115 S.C. KW T.C. 125 S.C. KW TCHD60S41S3 FC/MC62 1750 80 80 75 57 62 62 54.0 58.2 58.3 54.6 49.2 41.5 3.32 3.35 3.32 51.8 55.7 55.7 52.4 47.8 40.2 3.96 3.98 3.98 49.7 53.3 53.2 50.2 46.4 38.9 4.61 4.61 4.63 47.6 50.8 50.6 48.1 45.0 37.6 5.25 5.23 5.29 44.8 47.6 47.4 45.2 43.1 36.1 6.