model S1-THPU433-S RESIDENTIAL High Resolution Digital Thermostat with Humidity Control CTS Series Full Color Touch Screen Display Owner’s Manual & Installation Guide
CAUTION Follow the Installation Instructions before proceeding. Set the thermostat mode to “OFF” prior to changing settings in setup or restoring Factory Defaults. FCC Compliance Statement This equipment has been tested and found to comply with the limits for an intentional radiator, pursuant to Part 15, subpart C of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Cet appareil est conforme avec Industrie Canada, exempts de licence standard RSS(s).
Glossary of Terms Auto-Changeover: A mode in which the thermostat will turn on the heating or cooling based on room temperature demand. Cool Setpoint: The warmest temperature that the space should rise to before cooling is turned on (without regard to deadband). Deadband: The number of degrees the thermostat will wait, once a setpoint has been reached, before energizing heating or cooling. Differential: The forced temperature difference between the heat setpoint and the cool setpoint in Auto Mode.
Table of Contents GET TO KNOW YOUR THERMOSTAT Home Screen......................................................................................... 1 Menu Screens........................................................................................ 1 Dropdown Dashboard............................................................................ 2 Care and Use of Your Thermostat.......................................................... 5 QUICK START Selecting Your Desired Temperature and Mode.............
Table of Contents ALERTS.............................................................................................. 20 View Current Alerts..................................................................... 21 Reset Alerts................................................................................ 21 Set/Edit Reminders..................................................................... 21 Service Information (Who To Call For Service)........................... 21 DISPLAY............................
Table of Contents SETTINGS............................................................................................36 Thermostat Name...............................................................................40 Available Modes.................................................................................40 SD Card (Import and Export)...............................................................40 GENERAL SETUP.................................................................................
Table of Contents Dealer Information...............................................................................63 Upgrade Firmware...............................................................................63 Delete Custom Images.........................................................................63 Reset to Factory Default Settings........................................................63 Restart Thermostat..............................................................................63 WI-FI ...
Get To Know Your Thermostat Home Screen Indoor Humidity Reading Outdoor Temperature Backlit TouchScreen Display (If optional accessory is used or connected to Skyport) Drop Down Dashboard Button Connectivity Symbol Table Connectivity Symbol Warmer Button Not connected to Wi-Fi SD Card Slot Connected to local access point w/IP address without Skyport enabled Connected to local access point w/IP address, but not yet connected to Skyport Cooler Button Menu Button Connected to Skyport Fan Button Mo
Get To Know Your Thermostat Dropdown Dashboard The Dropdown Dashboard displays temperature, humidity, and other readings. It will also show the high and low readings of the day.
Get To Know Your Thermostat Dropdown Dashboard (The contents of your Dashboard may vary) Weather Display with forecast for the following 3 days Weather Display This page displays sensor information. Select ‘Onboard’ to view room temperature, and if equipped, humidity sensors that are built-into the thermostat. Select ‘Wireless’ to view all wireless sensors that this thermostat has access to.
Get To Know Your Thermostat These 3 screens are for informational purposes only. Settings may not be changed from these screens.
Get To Know Your Thermostat Care and Use of Your Thermostat Pencils, pens and other sharp objects should never be used on your thermostat; these may damage your touchscreen. Only use your finger tip to press the touchscreen buttons. Use a soft, damp cloth to clean the screen. DO NOT USE ABRASIVE CLEANERS OR CLEANERS THAT CONTAIN SOLVENTS. DO NOT SPRAY ANYTHING DIRECTLY ONTO THE THERMOSTAT.
Quick Start - Temperature, Modes & Fan Selecting Your Desired Temperature and Mode Press or to adjust temperature Cool Setpoint The Heat or Cool Setpoint is the temperature the room has to reach before heating or cooling will turn on. Fan Warmer Button (Without regard to deadband) Cooler Button Heat Setpoint Press or the MODE Icon HEAT will allow only heat operation. COOL will allow only cool operation. AUTO will allow both Heat and Cool operation. OFF - heating and cooling systems are turned off.
Quick Start - Set Time & Date Set Time & Date NOTE: When the thermostat is connected to a Skyport account, the Time & Date are automatically synchronized to the Skyport Cloud, including automatic Daylight Savings adjustments. Your time zone is selected in the Skyport web application.
Quick Start - Set Time & Date Setting the Time Press Press MENU then to scroll down. Set Time & Date Press Set Current Time Press Press hr + hr - BACK and (12:00 AM) min + min - when finished. Choose Use AM/PM - ON For 12 hour AM/PM clock Use AM/PM - OFF For 24 hour clock Press BACK when finished. 8 to set the current time.
Quick Start - Set Time & Date Setting the Date Press Set Current Date or Press 6/1/2013 to set the current month and year. Press the day on the calendar Su Mo Tu We Th Fr 27 28 29 30 1 2 Sa 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Press 1 2 3 4 5 6 7 when finished. BACK Daylight Savings Setup Turn Daylight Savings Time on or off. Adjust when Daylight Savings Time begins. Adjust when Daylight Savings Time ends.
Quick Start - Connect to Wi-Fi Connect to Wi-Fi (from initial start up) When power is connected to the thermostat and it has not been configured to connect to a Wi-Fi Access point, the following message appears: Wi-Fi Set Up No Wi-Fi access points are configured for your thermostat. Would you like to set up one now? YES YES NO Press YES Select the access point you wish to connect to from the list. Enter the password for the Wi-Fi Access Point and press NEXT. Select automatic setup and press NEXT.
Quick Start - Connect to Wi-Fi (from menus) 72 MENU Press MENU 72 Press DOWN Press Wi-Fi • Wi Fi Setup Press Wi-Fi Setup Select the access point from the list that you want to connect to. Enter the password for the Wi-Fi Access Point and press NEXT. Select automatic setup and press NEXT. When finished, a dialog box will appear confirming the successful connection to the local Wi-Fi Access Point. Select OK, then the Wi-Fi status page will appear.
Quick Start - Connect to Wi-Fi (from menus) Although there is more than one way to create a Skyport account, the steps below illustrate creation from a browser. If the thermostat is connected to the local Wi-Fi Access Point, but not yet joined to a Skyport account, you may join the thermostat to an account by doing the following: Select MENU from the thermostat’s home screen. Scroll down Select Skyport Select Skyport Account and follow the onscreen instructions. • Skyport Account 1.
Main Menu Buttons - Schedule Schedule View My Schedule Edit My Schedule 13
Main Menu Buttons - Schedule Schedule This thermostat features up to four programmable time periods per 24 hour day: Morning, Day, Evening, and Night. The start time for each time period is adjustable. The stop time for each time period is the start time for the next period. View My Schedule Press a day of the week to view its settings. This may be repeated for each day.
Main Menu Buttons - Schedule Edit My Schedule (Continued) Press and select a Time Period (Morning, Day, Evening, or Night) to edit. Next Adjust Mode, Start Time, and Heat and Cool Setpoints to desired settings. The Time Period may also be Enabled or Disabled. Un-check the Enabled box for Time Periods you don’t want to use. Press DONE when finished. Mode Heat and Cool Setpoints Enable/Disable Time Period Start Time Done When you are finished editing the four time periods press NEXT Review your program.
Main Menu Buttons - Smart Fan Smart Fan Who To Call Smart FanFor - OFF Service View Runtime Smart Fan Min Graphs Runtime Who To Call For Start/Stop Times Service View Runtime Days To RunGraphs Fan 16
Main Menu Buttons - Smart Fan Smart Fan The fan may be programmed to turn on automatically for a specified period during the day. Press to turn fan schedule on or off Smart Fan - OFF Smart Fan - ON Smart Fan Min Runtime (10m) Set the minimum number of minutes the fan will run from the top of each hour. Set runtime to 60 minutes to be on continuously from Start Time to Stop time. (5 - 60 mins.) Start/Stop Times (7:00AM - 9:00PM) Set when the Smart Fan schedule will start and stop.
Main Menu Buttons - Screensaver Screensaver Who To Call For Service Screensaver - OFF View Runtime Graphs Screensaver Setup Screensaver Turn On Delay Screensaver Type Slideshow Digital Clock Analog Clock Change Image After...
Main Menu Buttons - Screensaver Screensaver The Screensaver allows you to create custom slideshows. Screensaver - OFF Screensaver - ON Screensaver Setup Screensaver Turn On Delay (5m) How long after a button press for the Screensaver to appear. 1, 3, 5, or 30 minutes Screensaver Type (Slideshow) Slideshow, Digital Clock, Analog Clock Change Image After... 15, 30 seconds - 1, 5, or 10 minutes Use Theme Images - OFF Slideshow uses included Theme Images.
Main Menu Buttons - Alerts Alerts View Current Alerts Reset Alerts Reset Air Filter Alert Reset UV Lamp Alert Reset Humidity Pad Alert Set/Edit Reminders Service Call Reminder - OFF Days Until Service Call (0 days) Air Filter Reminder - OFF Set Max Filter Runtime (300 hrs) Set Max Filter Days (0 days) UV Lamp Reminder - OFF Max UV Lamp Runtime (360 days) Humidity Pad Reminder - OFF Set Max Hum Runtime Service Information...
Main Menu Buttons - Alerts Alerts The alerts let you know when your system needs service. View Current Alerts View and reset current service alerts here. Alerts will appear on the bottom bar of the Home Screen. Press to view and reset current alerts. Reset Alerts Clear and reset current service alerts. Set/Edit Reminders Set service alert runtimes and turn reminders on or off.
Main Menu Buttons - Display Display Active Brightness Idle Brightness Night Dimmer Auto Night Dimmer - OFF Set Idle Brightness Set Dimmer Schedule Maintenance Screen Cleaning Touch Calibration 22
Main Menu Buttons - Display The display brightness options may be adjusted in this menu. Display Active Brightness (80%) You may select how bright the backlight is while the thermostat is active. The display is active for 3 minutes after last touch, it then goes Idle. Idle Brightness (30%) You may select how bright the backlight is while the thermostat is idle. Night Dimmer You may dim the brightness of the screen at night.
Main Menu Buttons - Display Maintenance Maintenance allows you to clean and calibrate the touch screen. Screen Cleaning Screen Cleaning Mode disables the touch feature for 15 seconds so the screen may be cleaned without altering any settings. Use a soft cloth without solvents or abrasive cleaners Touch Calibration Under normal circumstances, the touchscreen should not need to be calibrated. Touch and hold the center of the targets as they appear on the screen for 3 seconds.
Main Menu Buttons - Preferences Preferences User Interface Themes Custom Wallpaper Heat/Cool Indicator Heat/Cool Indicator OFF Taskbar red/white OFF Room Temp red/blue OFF Mode Status red/blue OFF Sound Options Beep - OFF Beep Sound 25
Main Menu Buttons - Preferences Preferences You may set the type of background that appears on the thermostat Home Screen. User Interface Themes (ocean) This thermostat has several high quality background themes to choose from. NOTE: At 7pm, the background will change to an evening scene. At 7am it will return to a daytime scene. Custom Wallpaper You may choose your own background image by selecting a photo that you have uploaded from an SD memory card.
Main Menu Buttons - Preferences Humidity Humidification Settings Humidify setpoint (0%) Humidify with heat - OFF Run fan w/humidity demand - OFF Dehumidification Settings Dehumidity setpoint (99%) Run A/C to dehumidify - OFF Maximum Overcool (0°) Reheat - OFF Dehumidify only when cooling - ON 27
Main Menu Buttons - Preferences Humidity The Humidity feature allows the thermostat to control a humidifier or use your air conditioner to dehumidify the space IMPORTANT: Aux Output Usage must be set for Hum or Dehum for these settings to take effect. See: AUX Output Settings on page 60. Humidification Settings Humidify setpoint (0%) Adjust Humidify setpoint. (0% - 60%) Humidify with heat - OFF When this step is ON, Humidify will only run with a demand for heat.
Main Menu Buttons - Vacation/Away Vacation/Away Clear Vacation Schedule Set Vacation Schedule Start Date Start Time Return Date Return Time Settings while away Mode OFF Auto Heat Cool Heat Setpoint Cool Setpoint 29
Main Menu Buttons - Vacation/Away Vacation/Away Vacation or pressing the AWAY button, will use temporary, energy saving settings without changing the regular schedule. Pressing the HOME button will return the thermostat to normal comfort settings. Clear Vacation Schedule Removes the stored vacation schedule. Set Vacation Schedule Set your Vacation Schedule. Start Date Tue Sep 07 2010 Select the day Vacation Mode will start.
Main Menu Buttons - Vacation/Away Set Vacation Schedule Return Date (Continued) Tue Sep 21 2010 Select the day Vacation Mode will end. BACK Then press BACK Return Time (3:00 PM) Select the time Vacation Mode will end. BACK Then press Settings while away Select the desired Mode and setpoints to be used in Vacation/Away Mode.
Main Menu Buttons - Security Security Auto Screenlock Auto Screenlock - OFF Set Passcode Lock After...
Main Menu Buttons - Security Security settings may be set to limit or prevent changes to your thermostat. Security Auto Screenlock NOTE: Code must be set before Auto Screenlock can be turned on. Auto Screenlock - OFF Auto Screenlock - ON Set Passcode (code not set ) Use keypad to enter and confirm passcode. When the thermostat is locked, the bottom bar of the display will show: Press UNLOCK then enter passcode to access thermostat settings. Lock After...
Main Menu Buttons - Information Information View Runtime Graphs Last 7 Days - Cooling Last 7 Days - Heating Delete Runtime Data Who To Call For Service 34
Main Menu Buttons - Information Information This button contains valuable service and system runtime information. View Runtime Graphs Track your system’s runtime/energy usage. Last 7 Days - Cooling Press the information icon to learn more about each graph *NOTE: The runtime graphs are updated at 12:00 AM each day. Last 7 Days - Heating Press anywhere on the screen to return to the submenu. Delete Runtime Data Press to delete your current equipment runtime information.
Main Menu Buttons - Settings Settings Thermostat Name Available Modes All Modes Including Auto Heat and Cool Heat Only Cool Only SD Card Import Settings from SD Card Export Settings to SD Card General Setup Units Fahrenheit Celsius Language English Spanish/Espanol French/Francais Smart Recovery - ON/OFF Simple Thermostat - ON/OFF Automated Demand Response Installation Settings Heat & Cool Stages Heat & Cool Stages Compressor Stages Aux Heat Stages (Continued next page) 36 } Availability depends
Main Menu Buttons - Settings Settings (Continued) Installation Settings Timers & Deadbands Cycles Per Hour Min Heat/Cool Difference Compressor Min Off Time 1st Stage Deadband 2nd Stage Deadband 2nd Stage Deadband 2nd Stage Timer 2nd Stage Turnoff Point Deadband Setpoint 3rd Stage Deadband 3rd Stage Deadband 3rd Stage Timer 3rd Stage Turnoff Point Deadband Setpoint 4th Stage Deadband 4th Stage Deadband 4th Stage Timer 4th Stage Turnoff Point Deadband Setpoint Free Cooling Free Cooling - On/Off Usable Out
Main Menu Buttons - Settings Settings (Continued) Installation Settings Heat Pump Settings Heat Pump Lockout - Enabled/Disabled HP Lockout Outdoor Temp Aux Heat Lockout - Enabled/Disabled Aux Heat Lockout Temp Dual Fuel Settings Dual Fuel - On/Off Changeover With Outdoor - On/Off Adjust Balance Point AUX Output Settings AUX Output Usage AUX Output Polarity Fan Off Delay Sensor Settings (Continued next page) Control Source Thermostat Sensor Only Wired Sensor Only Average All Wireless Sensors Average Wir
Main Menu Buttons - Settings Settings (Continued) Installation Settings Test Outputs Dealer Information Dealer Name Contact Name Dealer Phone Dealer Email Dealer Website Upgrade Firmware Delete Custom Images Factory Defaults Restart Thermostat 39
Main Menu Buttons - Settings Settings Thermostat heating and cooling options are found in this menu Thermostat Name Use keypad to name your thermostat. The name is displayed on the Home Screen. (Up to 14 characters) Name appears here Available Modes (all) Choose the desired modes the thermostat will use: Heat, Cool, Heat & Cool, or Auto (All). For example, if you only have a heater, choose Heat, and only Heat & Off modes will be available. This will simplify the operation for the user.
Main Menu Buttons - Settings General Setup (Continued) Language (en) English Spanish/Español French/Français Smart Recovery - OFF Smart Recovery - ON Smart Recovery turns on the heat or cool before the Morning start time to bring the room temperature to the Morning setpoint at the start of the Morning time period. Please allow 4-8 days for Smart Recovery time to adjust. When used with a heat pump, electric strip heat will be disabled while Smart Recovery is active.
Main Menu Buttons - Settings Automated Demand Response Overview TouchScreen thermostats support the handling of specific signals from the utility provider. The utility generated signals carry pricing information and/or setback actions that alter the comfort settings of the thermostat in order to reduce energy usage on demand. This is known as Automated Demand Response or ADR for short.
Main Menu Buttons - Settings The Demand Response configuration page, shown below, is where the thermostat is configured to respond to the energy provider’s signals. It also sets operational parameters for the thermostat. The left column of the ADR configuration page allows or prevents access by the utility. Here communication with the utility and your thermostat may be turned On or Off.
Main Menu Buttons - Settings The right column of the ADR configuration page is where the occupant adjusts the operational parameters for ADR. The utility may send up to 3 types of ADR signals to Skyport. These are: 1) Pricing for the cost of energy, 2) An Offset to the occupants’ comfort setpoints, and 3) a signal to enforce discrete or Static setpoints. The Maximum Cooling Setpoint and Minimum Heating Setpoints for ADR events are adjusted here.
Main Menu Buttons - Settings Selecting the Overview tab of the ADR page will cause a summary of ADR events to be displayed.
Main Menu Buttons - Settings Automated Demand Response Utility and Program setup must be done at the Skyport Cloud Services account. From the thermostat Home Screen, press the ‘Menu’ button, then select ‘Settings”. From the above screen the ‘Automated Demand Response’ button is pressed. By selecting ADR – On, the user can participate in ADR events triggered by their utility, or price dependent events.
Main Menu Buttons - Settings Selecting the ‘Price Dependent Action’ button allows the user to determine what action is taken when the price rises above the set threshold. In the above example; if the price threshold is exceeded, the thermostat will invoke the ‘Offset Setpoints’ configured for an ADR event until the event is over. Please note that the Threshold price may only be set in the Skyport Cloud Services account. Selecting ‘Skip Event’ will take no action when the set price threshold is exceeded.
Main Menu Buttons - Settings The user may limit the maximum Cooling Setpoint.
Main Menu Buttons - Settings The user may limit the minimum Heating Setpoint.
Main Menu Buttons - Settings -2 The user may adjust the ADR Cooling ‘static’ Setpoint.
Main Menu Buttons - Settings -2 The user may adjust the ADR Heating ‘static’ Setpoint.
Main Menu Buttons - Settings -2 The user may adjust the ADR Cool offset. During an ADR event the cooling setpoint will be adjusted by the amount of degrees configured in this step.
Main Menu Buttons - Settings -2 The user may adjust the ADR Heat offset. During an ADR event the heating setpoint will be adjusted by the amount of degrees configured in this step.
Main Menu Buttons - Settings When an ADR event is pending, and hasn’t started yet, there will be a yellow leaf on the top bar. This will be accompanied by associated text as shown below. During an ADR event there will be a green leaf on the top bar. This will be accompanied by associated text as shown below.
Main Menu Buttons - Settings If a Warmer or Cooler button is pressed during an active ADR event, then the user is presented with this opt-out screen. If a pricing triggered ADR event is enabled, there will be a green leaf on the top bar along with the actual cost of energy.
Main Menu Buttons - Settings Installation Settings Heat & Cool Stages (1h1c) (1h1c) Heat & Cool Stages Up to 2 Stages Cooling and 4 stages Heating. (1h1c) Compressor Stages Up to 2 compressors. (1h1c) Aux Heat Stages 0 to 2 stages of Aux Heating. } Only available when dip switch is set for Heat Pump operation. Timers & Deadbands Cycles Per Hour (6) At 6 cycles per hour, the HVAC unit will only be allowed to energize once every 10 minutes.
Main Menu Buttons - Settings Installation Settings (Continued) Timers & Deadbands (Continued) The Deadband is the number of degrees or minutes that the thermostat waits before it initiates the stages of heating or cooling. 1st Stage Deadband Specifies the minimum temperature difference between the room temperature and the desired setpoint before the first stage of heating or cooling is allowed to turn on.
Main Menu Buttons - Settings (Continued) Installation Settings Free Cooling Free Cooling requires additional dampers and duct work to be installed. Additionally, the thermostat is wired in a different manner for this feature to function properly. Before enabling this feature, please make sure these steps are completed. Free Cooling - DISABLED Free Cooling - ENABLED Turns on Free Cooling. Usable Outdoor Temp (65˚) Free Cooling shuts off above this outdoor temperature.
Main Menu Buttons - Settings (Continued) Installation Settings Heat Pump Settings Heat Pump Lockout - DISABLED (Only available when dip switch is set for Heat Pump operation.) Heat Pump Lockout - ENABLED Turns on Heat Pump Lockout. HP Lockout Outdoor Temp (65˚) Heat Pump will not run below this temp. (20 - 75 deg. F) Aux Heat Lockout - DISABLED Aux Heat Lockout - ENABLED Turns on Aux Heat Lockout. Aux Heat Lockout Temp (65˚) Aux Heat will not run above this temp. (0 - 75 deg.
Main Menu Buttons - Settings (Continued) Installation Settings AUX Output Settings Allows the W3/AUX output to be used for Heating, Humidification, or Dehumidification. AUX output usage (W3) IMPORTANT: Aux Output Usage must be set for Hum or Dehum before any settings will take effect in the Humidity Main Menu. AUX output polarity (NO) The AUX Output polarity may be set for Normally Open or Normally Closed to accommodate different types of humidification and dehumidification equipment.
Main Menu Buttons - Settings (Continued) Installation Settings Fan Off Delay (0s) Runs the fan for a short time after Cooling or electric strip heat turns off to increase system efficiency. (0 - 120 Secs.) Sensor Settings Control Sensor (thermostat ) When a remote sensor is connected to the thermostat, the user may choose which sensor source is used to measure room temperature.
The wired sensor may be used as follows: • Use as outdoor sensor as remote sensor Main•• Use Menu Buttons - Settings Use as supply sensor • Use as return sensor Calibrate Sensors (0˚) The thermostat and wired sensor may be calibrated -7 to +7 degrees F. The integral humidity sensor may be calibrated -20% to +20% RH • Thermostat • Wired Sensor • Humidity Test Outputs The installer or service technician can use this feature to test the functions without any time delays from the thermostat.
Main Menu Buttons - Settings Dealer Information A Dealer may enter their company contact information for the customer to use when they need service. This will appear when the “Who To Call For Service” button is pressed in the Information Menu. Use the keyboard to enter your information. • Dealer Name • Contact Name • Dealer Phone • Dealer Email • Dealer Website Dealer’s Logo here Upgrade Firmware Press to upgrade the thermostat firmware.
Main Menu Buttons - Wi-Fi Wi-Fi Enabled Wi-Fi Status Wi-Fi Setup Choose Network Password Entry Local API Option Local API - OFF API Protocol HTTP HTTPS 64
Main Menu Buttons - Wi-Fi Wi-Fi Wi-Fi Enabled This option allows the Wi-Fi radio to be turned off or on. Wi-Fi Status It is here that you will find helpful information regarding the connectivity status of your thermostat, including the thermostat’s ID. Wi-Fi Setup Choose your network from the list and enter the network password. Network Name 1 Network Name 2 Network Name 3 If your network does not appear in the list, hit the refresh button.
Main Menu Buttons - Wi-Fi This is the default with the local API OFF. • Local API - OFF • API Protocol (http) To turn on the HTTP Local API select Local API • Local API - ON • API Protocol (http) Press BACK to return to previous screen. If a Secure API is preferred, then select API Protocol • Local API - OFF • API Protocol (http) Upon pressing API Protocol, the following screen will appear.
Main Menu Buttons - Wi-Fi Upon pressing BACK, the screen will look like this. • Local API - OFF •API APIProtocol Protocol (https) (http) • Basic Auth User •API Basic Auth Password Protocol PRESS (http) • Basic Auth User Select Basic Auth User, and enter the appropriate information on the screen below and press DONE to save.
Main Menu Buttons - Wi-Fi • Basic Auth Password Select Basic Auth Password and enter the appropriate information on the screen below and press DONE to save. | Q W A Shift E R T S D F Z X C Y J K L V B N M Del BACK Basic Auth Password (https) (http) 68 P O H SPACE • Basic Auth User •API Basic Auth Password Protocol I G The last step is to turn the Local API as shown below.
Main Menu Buttons - Skyport Skyport Skyport Services - ON Weather Updates - ON Skyport Account Skyport Account Pressing this button will let you know if you are paired with a Skyport account. If not, then you may follow prompt and instructions to create an account and add the thermostat to the account.
Main Menu Buttons - Emergency Heat Emergency Heat The Emergency Heat function is only available if your thermostat is set to control a Heat Pump. To initiate the Emergency Heat feature, Press the Emergency Heat button. During Emergency Heat operation the thermostat will turn on the fan and auxiliary stages of heat when there is a demand for heat. The 1st stage of heating and all stages of cooling will be unavailable. To exit Emergency Heat, press the Emergency Heat button.
CTS Series Desktop App CTS Series Desktop App may be downloaded at no charge at: http://source1thermostats.com/CTSSeries.html#desktopApp Every time the user runs the CTS Desktop App software, it automatically connects to the Source 1 Color Display website in the background and updates the software and firmware (the operating system for touch screen) at no cost.
CTS Series Assistant Uploading Photos and Settings to your thermostat When you are finished adding and editing photos and settings, click on Save to SD. When prompted, remove the SD card from the SD card reader on your computer. Save to SD *NOTE: A 2GB SD card is recommended. At the thermostat: Insert the SD card into the SD Card Slot.
Installation Instructions Remove and Replace the old thermostat To install the thermostat properly, please follow these step by step instructions. If you are unsure about any of these steps, call a qualified technician for assistance. • Assemble tools: Flat blade screwdriver, wire cutters and wire strippers. • Make sure your Heater/Air Conditioner is working properly before beginning installation of the thermostat. • Carefully unpack the thermostat. Save the screws, any brackets, and instructions.
Installation Instructions Wire Connections If the terminal designations on your old thermostat do not match those on the new thermostat, refer to the chart below or the wiring diagrams that follow. Wire from the old thermostat Function terminal marked G or F Fan Install on the new thermostat connector marked G Y1, Y Cooling Y1 W1, W Heating W1/0/B Rh, R, M, Vr, A Power R C Common C O/B Rev.
Installation Instructions Before you go any further, determine what your existing wiring and equipment situation is. A. If you have a Heating only system without Air Conditioning, the Source 1 thermostat will require 3 wires: R (24Vac), C (24Vac) and W (Heat). Most systems that only have Heating use very simple thermostats that require 2 wires: the R (24Vac) and W (Heat). The Source 1 thermostat requires 3 wires to the thermostat.
Installation Instructions D. If you have a heat pump without aux heat, the Source 1 model will require 5 wires: R (24Vac), C (24Vac), W1/O/B (Reversing Valve), Y (1st Stage Compressor), and G (Fan). If you are short 1 wire, there are at least 3 options available to connect the Source 1 thermostat: 1. Use the available wires as instructed in the“Making 4 Wires Work When 5 Wires Are Required” section on page 77 and note that the fan will only operate with a Heating or Cooling demand. 2.
Installation Instructions Making 4 Wires Work When 5 Wires Are Required If you would like to install the Source 1 thermostat using only 4 wires when 5 are required, follow the directions below. You will need a screwdriver along with a 3" long piece of thermostat wire to use as a jumper: 1. Make sure the power is off. 2. Label and disconnect wires at the thermostat. Please note the color and corresponding wire designator with each color. For example: The R wire is red and the W wire is white and so on.
Installation Instructions Making 5 Wires Work When 6 Wires Are Required If you have a system that requires 6 wires, and you would like to install the Source 1 thermostat using only 5 wires, follow the directions below. You will need a screwdriver along with a 3" long piece of thermostat wire to use as a jumper: 1. Make sure the power is off. 2. Label and disconnect wires at the thermostat. Please note the color and corresponding wire designator with each color.
Installation Instructions W1/O/B Y2 Y1 W2 W3/AUX The Source 1 Thermostat Backplate NOTE: The backplate does not fully cover a full size vertical junction box. The S1-CTSPLATE Source 1 Wallplate or a single-gang, horizontally mounted junction box would be needed for that type of installation SENSOR To remove the thermostat backplate: Using the Finger Pull Areas, pull the front housing away from the backplate.
Installation Instructions Explanation of Thermostat Dip Switches 2 1 ON 2 OR HP B ELEC This dip switch configures the thermostat to control a conventional gas/electric system or a heat pump. If your system is anything other than a heat pump, leave this switch set for GAS/EL.
Installation Instructions Sample Wiring Diagrams with Dip Switch Positions Conventional Heating and Cooling Systems GAS/EL O GAS Residential & Commercial 1 Stage Cooling, with 1 stage Gas Heat. Residential & Commercial 1 Stage Cooling, with 1 stage Electric Heat. 3 2 1 GAS/EL O GAS 24VAC Power 24VAC Common 1st Stage Heat 1st Stage Cool Fan ON R C W1/O/B Y1 G HP B ELEC 3 2 1 HP B ELEC 8 Wire, 2 Stage Cooling, 3 Stage Heat Residential & Commercial 2 Stage Cooling, with 3 stage Gas Heat.
Installation Instructions Sample Wiring Diagrams with Dip Switch Positions Heat Pump Systems 5 Wire, 1 Stage Cooling, 1 Stage Heat 6 Wire, 1 Stage Cooling, 2 Stage Heat R C W1/O/B Y1 R C W1/O/B Y1 Residential & Commercial Heat Pump with ‘O’ Reversing Valve O 3 GAS/EL GAS 2 W2 G HP B ELEC 24VAC Power 24VAC Common Reversing Valve 1st Stage Compressor (Cool or Heat) Aux Heat Fan 1 3 1 GAS 2 O ON G GAS/EL 24VAC Power 24VAC Common Reversing Valve 1st Stage Compressor (Cool or Heat) Fan ON
Installation Instructions Sample Wiring Diagrams with Dip Switch Positions Heat Pump Systems with Dual Fuel 7 Wire, 2 Stage Cooling, 3 Stage Heat 2 1 GAS/EL O GAS ON R 24VAC Power C 24VAC Common W1/O/B Reversing Valve W2 3rd Stage Heat (connected to furnace) Y1 1st Stage Compressor (Cool or Heat) Y2 2nd Stage Compressor (Cool or Heat) G Fan 3 Residential & Commercial Heat Pump with ‘O’ Reversing Valve and Fossil Fuel furnace. HP B ELEC Number of Compressor Stages set to 2 (see Compressor Stages, pg.
Installation Instructions Sample Wiring Diagrams Outdoor Sensor: S1-CTSDTS Temperature Sensor 10K ohm sensor at 77F/25C. Negative Temperature Coefficient. 10K Thermistor Outdoor Sensor G R C W3/AUX W2 W1/O/B Y2 Y1 Use 18-22 gauge thermostat wire. SENSOR S1-CTSDTS 10K Thermistor Remote Sensor 84 G R C W3/AUX W2 W1/O/B Y2 Y1 Use 18-22 gauge thermostat wire.
Installation Instructions Sample Wiring Diagrams Humidification Use 16-24 gauge thermostat wire. SENSOR G R C W3/AUX W2 W1/O/B Y2 Y1 AUX Output Usage must be set for Hum Humidification System Dehumidification AUX Output Usage must be set for Dehum Dehumidification Terminal on Equipment DEHUM/ HUM 85 SENSOR G R C W3/AUX W2 W1/O/B Y2 Y1 Use 16-24 gauge thermostat wire.
Troubleshooting • SYMPTOM: The thermostat touchscreen buttons are not responsive. CAUSE: The touchscreen is out of calibration. REMEDY: Remove the thermostat from the backplate. Push the thermostat back onto the backplate, while keeping your finger pressed firmly against the center of the touchscreen, until the Calibration screen appears. Re-calibrate the touchscreen. See Touch Calibration section of full user’s manual (page 24). • SYMPTOM: The display is blank. CAUSE: Lack of proper power.
Warranty One-Year Warranty - This Product is warranted to be free from defects in material and workmanship.
Patents Issued & Pending P/N 88-1406 Rev.
