Owner`s manual

23
ENGLISH
DC Inverter R-410A
OPTIMAL OPERATION
To achieve optimal performance, please note the following:
• Adjust the air flow direction correctly so that it is not directed on people.
• Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive temperature level.
• Close doors and windows on COOL or HEAT modes, or performance may be reduced.
• Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner may be reduced and the
air conditioner may stop running.
• Clean the air filter periodically, otherwise cooling or heating performance may be reduced.
• Do not operate unit with horizontal louver in closed position.
ADJUSTING AIR FLOW DIRECTION
While the unit is in operation, you can adjust the air flow louver to change the flow direction and naturalize the room
temperature evenly. Thus you can enjoy it more comfortably.
1. Set the desired air flow direction.
Push the
SWING button to adjust the louver to the desired position and push this button again to maintain the
louver at this position.
2. Adjust the air flow direction automatically.
Push the
SWING button, the louver will swing automatically.
While this function is set, the swing fan of indoor unit runs; otherwise, the swing fan doesnʼt run. The swing scale of
every side is 30°. When the air conditioner is not in operation (including when “TIMER ON” is set), The SWING button
will be disabled.
Adjust it up and down
For 18,000-24,000 Btu/h For 36,000-60,000 Btu/h
Power supply
220-240V ~ 50Hz
1-Phase
(3-core cable 3x1.0 mm
2
)
3-core sheild cable 3-core sheild cable
Power supply
380-415V ~ 50Hz
3-Phase
(5-core cable 5x2.5 mm
2
)
Power supply
220-240V ~ 50Hz
1-Phase
(3-core cable 3x2.5 mm
2
)
Power supply
220-240V ~ 50Hz
1-Phase
(3-core cable 3x1.0 mm
2
)
OUTDOOR UNIT
INDOOR UNIT
INDOOR UNIT
OUTDOOR UNIT
J391_EN.indd 23 3/14/07 1:34:14 PM