Service manual

182
!
Disassembly
Unscrew the 5 screws fixing the panel and
dextrorotate the front panel to pull it out from
groove.
Unscrew the 2 screws fixing electric box ,and then
unscrew the 5 screws fixing the right side plate to
remove it.
Right Side Plate
Screws
Screws
Screws
Electric box cover
Screws
Firstly unscrew off two pcs screw on the lelectric box cover,
take down the connection wire of motor, compressor, sensor,
terminal and two pcs screw which fixes the electric box, then
can take down the electric box.
electric heating belt, screw off the earth screw at side wire