Service manual

179
!
Disassembly
4.Disassemble the electric box cover
Slightly press the electric box cover to make the clasps out
take down the ambient sensor, can take down the electrric box
cover.
Electric box cover
5.Disassemble electric box
Screw off the screws fix the electrix box, screw off the earh screw,
pull out the tube sensor, pull out the air guide motor, the wiring terminal
of motor, screw off the screws fixing the displayer, can take down
the electric box.
Earth screw
Wire terminal
Mianboard
Tube temperature sensor
Cold plasma
Screws
6.Disassemble the evaporator
Screw off the screws fixing the connection pipe clamp, loosen the clasp
from left side, take down the connection pipe clamp; Unscrew the screws
at both sides of evaporator, slightly move right toward, to make the right
side clasp loosen, then can take down the evaporator.
Screws
Connection pipe clamp