Specifications

392856-YTG-C-0109
Johnson Controls Unitary Products 5
nickel chromium elements mounted at the discharge of
the supply air blower to provide a high velocity and uni-
form distribution of air across the heating elements.
Every element is fully protected against excessive tem-
perature by thermal limit switches.
The power supply wiring can be routed into the control
box through a threaded pipe connection (field supplied)
in the base pan of the unit or through a knockout in the
wiring panel on the side of the unit.
• BAS Controls - York’s Sunline™ series units offer factory
mounted BAS controls such as Simplicity
®
INTELLI-Com-
fort™, Novar, Honeywell, Johnson, York Commercial
Comfort System (YCCS) and CPC.
FIGURE 1 - UNIT CUTAWAY GAS/ELECTRIC
3/4 " PVC female
condensate drain
Knockout
for side
control entry
GFCI
convenience outlet
Smoke
detector
Slide-in
economizer
Economizer
hood
HACR
breaker
20 Gauge aluminized
steel tubular heat exchanger
Electric heat
accessory location
Power ventor motor with
post purge cycle
High efficiency
compressor
Knockout for side
gas supply entry
Simplicity® Lite™
control board
Copper tube/
aluminum fin
condensing coil
Full perimeter baserails
with forklift slots and
lifting holes
Knockout
for side
power entry
Belt drive or
Direct drive
blower