User manual

Antwerpsesteenweg 19 - 9080 Lochristi - Belgium - www.racktivity.com v 2014.5.14

When required, the SNMP Trap Action can be sent to up to 3 SNMP trap receivers by entering a

second and/or third SNMP Host.

E-mail

The E-mail Action will require you to enter one or more recipient e-mail addresses. Multiple

addresses can be separated by using a comma (“,”) between each address.

Internal Event

This option is for system integrators or when expanding the DCPM system only and requires

additional code to be written manually. Contact Racktivity Support for more details.

Modifying Alarms

Edit

To edit the properties of an existing Alarm:

1. Navigate to the Component Page of the Alarm.

2. Scroll to the User Defined Alarms section.

3. Click the Edit button next to the desired Alarm.

4. The Alarm Wizard will be opened. Follow the screens as described above.

Note: When editing an Alarm that was duplicated for all Components of the same type

(see chapter: ) use the “Alarm was created for all [Components]. Apply changes to all.”

checkbox to edit all Alarms simultaneously.

Delete

To delete an existing Alarm:

1. Navigate to the Component Page of the Alarm.