User manual

© 2011 Racktivity NV 78/160
Antwerpsesteenweg 19 - 9080 Lochristi - Belgium - www.racktivity.com v 2014.5.14
Module ID: Enter the internal Modbus slave ID from the device. Should always be a
unique numeric value.
IP address: Enter the IP address of your device
API Port: Enter the API port of your device. By default you should use ‘443’.
Complete the wizard by entering the device login IDs and corresponding passwords.
When adding a DC²Sensor to your DCPM module, you will need to complete the additional
permission data requested in order to connect your device to DCPM.
Once completed, the wizard guides you to step 2 where you are asked to define the
corresponding feed data, in case a feed is defined.
By measuring the incoming power versus the output power, it is possible to identify the
power usage efficiency.
Identify Feed monitor
The feed monitor module can be located as direct child on the connected level.
Click on the link to go to the feed monitor page and view the respective feed data = what the
feed monitor is measuring.
Energy Consumer