User manual

© 2011 Racktivity NV 28/160
Antwerpsesteenweg 19 - 9080 Lochristi - Belgium - www.racktivity.com v 2014.5.14
Update from version 1.3.4 to version 1.3.5
In this section of the document we have added the procedure for upgrading the DCPM software
from version 1.3.4 to version 1.3.5.
If an older version of DCPM is installed you need to make sure that you perform the upgrades per
version, so from 1.3.2 to 1.3.3 to 1.3.4 to 1.3.5.
1. Log in on the machine where DCPM is installed and go to the terminal.
2. Log in as root.
3. Type “mkdir 1.3.5” to make a new directory
4. Type “cd 1.3.5”
5. Download the new installation package by adding the following command:
a. wget http://downloads.test.racktivity.com/dcpm/1.3.5/installationpackage.tgz
6. Follow steps 3 to 5 from the DCPM installation section
7. Question is asked by DCPM if you would like to upgrade. Press “Y”
Update from version 1.3.5 to version 1.4.0
In this section of the document we have added the procedure for upgrading the DCPM software
from version 1.3.5 to version 1.4.
If an older version of DCPM is installed you need to make sure that you perform the upgrades per
version, so from 1.3.2 to 1.3.3 to 1.3.4 to 1.3.5 and from 1.3.5 to 1.4.0
1. Log in on the machine where DCPM is installed and go to the terminal.
2. Log in as root.
3. Type “mkdir 1.4” to make a new directory
4. Type “cd 1.4”
5. Download the new installation package by adding the following command:
a. wget http://downloads.test.racktivity.com/dcpm/1.4.0/installationpackage.tgz
6. Follow steps 3 to 5 from the DCPM installation section
7. Question is asked by DCPM if you would like to upgrade. Press “Y”