Technical Guide

ManualsBrandsYork ManualsAir Handler/CoilYork CU

TECHNICAL GUIDE

ADD - ON COILS

FOR USE WITH SPLIT-SYSTEM

COOLING & HEAT PUMPS

MODELS: CF, CM, CU

600 - 2000 CFM 1.5 - 5 TON COILS

Due to continuous product improvement,

specifications are subject to change without notice.

Visit us on the web at:

www.upgnet.com and www.york.com

Additional rating information can be found at:

www.ahridirectory.org

UPFLOW/DOWNFLOW

FULL CASED

MULTI-POSITION

UPFLOW

UNCASED

A0368-001

ISO 9001

Certified Quality

Management System

5005743-YTG-C-0815

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

These indoor coils are designed to be installed with UPG fur-

naces or modular air handlers and matched with UPG cooling

and heat pump outdoor units. All coil models are available as

“flex-coil” units without a factory installed metering device. Flex-

coil models allow these coils to be used with R-410A or R-22 for

added flexibility to meet refrigerant system choice. A piston or

TXV metering device should be installed in the field to meet

your system requirements.

CF Models, Full Case Coils - Full cased coils are suitable for

use in upflow or downflow applications.

CM Models, Multi-Position Coils - CM coils have the added

flexibility that allow them to be installed in any position - upflow,

downflow, or horizontal (right or left). This coil can be easily

installed with a UPG furnace or modular air handler in any con-

figuration.

CU Models, Uncased Coils - These coils are designed for

installation on top of upflow furnaces, and they are to be used

for upflow only applications. The uncased coils require field

modification of the furnace duct for the coil installation.

FEATURES

- Rigid Case Construction interior endoskeleton for struc-

tural support, flush side, and locks in insulation.

Powder-painted - G30 galvanized steel case provide a coated

edge that resists corrosion and rust creep.

MaxAlloy

Coil - Long life aluminum coils built to deliver last-

ing performance, efficiency and reliability.

Quality Construction - Structural components are made of

Aluminum or G90 galvanized steel to prevent corrosion.

Improved Insulation Design - Single piece with no external

screws to reduce thermal transmission paths to prevent sweat-

ing. Foil faced insulation for ease of cleaning.

Thermostatic Expansion Valve - Bolt-on TXV provides easy

installation to convert the indoor coil to the required refrigerant

that does not require brazing to replace or install. Some models

are available with factory installed TXVs.

Case Depth - These models have 20.5” casing which provide

ease of attic access and tight applications.

Thermal Plastic Drain Pan

- Positive slope for drainage to

reduce cause for potential mold or contaminates.

ACCESSORIES

Refer to Price Manual for specific model numbers.

TXV Kits - Thermal expansion valve kits are available for flex-

coil applications with R-410A refrigerant. All TXV kits are non-

braze. All connections are bolt-on including the valve assembly

and equalizer tube. No orifice or any other metering device is to

be used in conjunction with the TXV.

Partial Case – Available to be used with CU coils in four widths.

This option is intended for upflow applications where height lim-

itations in the application prevent the installation of full cased

coils. The partial case design allows the top section of the

indoor coil to be installed in the duct or plenum.

Coil Casing Without Coil - Coil casings are available in four

widths that can be installed with the furnace or modular air han-

dler during initial installation. This option is available to allow the

installer the flexibility to add the coil at a later date without duct

modifications.

UVC Germicidal Light - The UVC technology effectively pre-

vents mold, bacteria, and other microorganisms that develop in

air handling systems. The UVC Light Kit provides safe, continu-

ous cleaning while actually saving money by reducing HVAC

system maintenance and energy consumption.

Summary of content (12 pages)

PAGE 1
5005743-YTG-C-0815 DESCRIPTION These indoor coils are designed to be installed with UPG furnaces or modular air handlers and matched with UPG cooling and heat pump outdoor units. All coil models are available as “flex-coil” units without a factory installed metering device. Flexcoil models allow these coils to be used with R-410A or R-22 for added flexibility to meet refrigerant system choice. A piston or TXV metering device should be installed in the field to meet your system requirements.
PAGE 2
5005743-YTG-C-0815 DIMENSIONS Dimensions 2 19-1/8” (OPENING) C (OPENING) A B 20-1/2” 21-1/2” BOTTOM OPENING DIMENSIONS 19-1/8" D (OPENING) A0322-001 1. 2. 3. 4. 5.
PAGE 3
5005743-YTG-C-0815 Dimensions 1 Models A 21” B A0350-002 1. 2. 3. 4.
PAGE 4
5005743-YTG-C-0815 UPFLOW "N" TYPE COIL - COOLING CAPACITY (Coil Only1) Models Rated CFM CF30C 1000 CF30D 1000 CF36A 1200 CF36B 1200 CF36C 1200 CF36D 1200 CF42B 1400 CF42C 1400 CF42D 1400 CF48C 1600 CF48D 1600 CF60C 1800 CF60D 1800 CF64D 1800 Entering Air Dry/Wet Bulb (°F) 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/6
PAGE 5
005743-YTG-C-0815 FULL-CASED “N” TYPE MULTI-POSITION COIL - COOLING CAPACITY (COIL ONLY1) Model Coil Rated CFM CM18A 600 CM18B 600 CM24A 800 CM24B 800 CM24C 800 CM30A 1000 CM30B 1000 CM30C 1000 CM30D 1000 CM36A 1200 CM36B 1200 CM36C 1200 CM36D 1200 CM42C 1400 Entering Air °F (Dry/Wet Bulb) 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/5
PAGE 6
5005743-YTG-C-0815 FULL-CASED “N” TYPE MULTI-POSITION COIL - COOLING CAPACITY (COIL ONLY1) (Continued) Model Coil Rated CFM CM42D 1400 CM48C 1600 CM48D 1600 CM60C 1800 CM60D 1800 CM64D 1800 Entering Air °F (Dry/Wet Bulb) 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 MBH@ Evaporator Temperature and Corresponding Pressure °F / PSIG 35 / 61.5 40 / 68.5 45 / 76.0 50 / 84.0 100.6 89.8 78.2 64.7 83.
PAGE 7
5005743-YTG-C-0815 UNCASED UPFLOW “N” TYPE COIL - COOLING CAPACITY (COIL ONLY1) Models Rated CFM2 CU30C 1000 CU30D 1000 CU36B 1200 CU36C 1200 CU36D 1200 CU42C 1400 CU42D 1400 CU48C 1600 CU48D 1600 CU60C 1800 CU60D 1800 Entering Air Dry/Wet Bulb (°F) 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/57 85/72 80/67 75/62 70/5
PAGE 8
5005743-YTG-C-0815 STATIC PRESSURE VS.
PAGE 9
5005743-YTG-C-0815 APPLICATION FACTOR-RATED CFM VS.
PAGE 10
5005743-YTG-C-0815 PHYSICAL DATA COIL TECHNICAL DATA1 - CASED UPFLOW/DOWNFLOW Model CF18A CF18B CF24A CF24B CF24C CF30A CF30B CF30C CF30D CF36A CF36B CF36C CF36D CF42B CF42C CF42D CF48C CF48D CF60C CF60D CF64D Application Cooling/Heat Pump Refrig. Face Conn. Area Types (Sq. Ft.) 4.28 4.28 4.99 4.99 4.99 6.41 6.41 6.41 6.41 7.12 7.12 Sweat 7.12 7.12 7.84 7.84 7.84 8.55 8.55 9.98 9.98 9.98 Fin Per In.
PAGE 11
5005743-YTG-C-0815 COIL TECHNICAL DATA1 - UNCASED UPFLOW - “N” TYPE Models CU18A CU18B CU24A CU24B CU24C CU30A CU30B CU30C CU30D CU36B CU36C CU36D CU42C CU42D CU48C CU48D CU60C CU60D Application Cooling /Heat Pump Refrig . Conn. Types Face Area (Sq. Ft.) Sweat 4.28 4.28 4.99 4.99 4.99 6.41 6.41 6.41 6.41 7.12 7.12 7.12 7.84 7.84 8.55 8.55 9.98 9.98 Rows Deep 2 Fins Per Inch Coil Size 14 (3) 12 x 17.1 (3) 12 x 17.1 (3) 14 x 17.1 (3) 14 x 17.1 (3) 14 x 17.1 (3) 18 x 17.1 (3) 18 x 17.
PAGE 12
MULTIPOSITION "N" TYPE COIL - AIR FLOW DATA (CFM)1 Models CM18A CM18B CM24A CM24B CM24C CM30A CM30B CM30C CM30D CM36A CM36B CM36C CM36D CM42C CM42D CM48C CM48D CM60C CM60D CM64D 0.1 0.2 500 670 490 760 910 520 670 970 1180 520 710 980 1210 970 1190 970 1250 910 1220 970 700 960 710 1050 1330 750 1000 1410 1720 740 1020 1420 1750 1420 1730 1450 1820 1551 1730 1540 External Static Pressure (in. wc.) 0.3 0.4 0.