Specifications

2-19
JOHNSON CONTROLS
FORM 102.20-N1 (1109)
2
LD13374
LD13773A
Connectors
3. Attach power pulls or come-a-longs to the rst
section. Use the lifting lugs on baserail (not at
the shipping split) or holes in the two outside
corners (see Fig. 2-25).
For expanded cabinet with structural steel base
remove lifting lugs within the shipping split.
retain bolts and. nuts (see Fig. 2-26).
FIG. 2-25 – PLACING AND ANCHORING FIRST
SECTION AND ATTACHING COME-A-
LONGS
FIG. 2-26 – REMOVE LIFTING LUGS AND SAVE
HARDWARE
4. Place the next section about 8" from the section(s)
already placed.
5. At this time feed the electrical and control con-
nections from section to section and ensure that
they will be accessible after the sections are
joined. If any will not be accessible, assemble
the electrical connectors and/or pneumatic tubes
each according to their labels before joining of
sections is complete. Refer to Fig. 2-27.
LD14265
WELDED CHANNEL FILLER
BASE CHANNEL
REMOVABLE LIFITING LUGS
Remove lifting lugs before
assembling shipping splits.
Retain bolts,etc. and use to
secure assembled shipping split.
FIG. 2-27 – ELECTRICAL CONNECTIONS
All lighting and 3-phase wires must
be hard wired when no plug-ins are
provided.
6. Attach the power pulls or come-a-longs to the far
end of the next section.
Ensure chain does not apply pressure
to drain connection. Improper posi-
tioning of chain may cause damage
to unit.
LD13782