Specifications

2-73

JOHNSON CONTROLS

FORM 102.20-N1 (1109)

7. Repeat the installation for the remaining prelter

latches.

8. Place the prelter against the face of the VariCel

DH lter. The prelter latches may have to be

re-positioned as shown in Fig.2-113, to allow the

proper placement of the prelter.

9. Grasp the end of the prelter latch and “spring” it

so that it ts over the edge of the prelter. Repeat

with the remaining latches.

After all remaining prelter latches have been

placed around the prelter; the nished assembly

should look like that in Fig.2-115.

FIG. 2-113 – POSITION PREFILTER IN FRONT OF

THE FINAL FILTER. (2" W/026-36339-

000 LATCH SHOWN)

LD010165

FIG. 2-114 – SPRING THE END OF THE LATCH SO

THAT IT FITS OVER THE EDGE OF

THE PREFILTER. (4" W/026-36339-000

LATCH SHOWN)

LD010190

FIG. 2-115 – COMPLETED ASSEMBLY

LD010167