Technical Guide

ManualsBrandsYork ManualsAir Handler/CoilYork AP Air Handler

1055230-YTG-D-0514

Johnson Controls Unitary Products 11

Models

Blower

Motor Speed

External Static Pressure (in. wc.)

0.10 0.20 0.30 0.40 0.50 0.60 0.70

230 Volt

AHR42C

High

1750 1670 1570 1477 1260 1125 935

Medium

1590 1520 1435 1277 1150 1010 870

Low

1330 1280 1200 1083 980 850 NA

AHR48D

High

2005 1940 1850 1755 1650 1530 1405

Medium

1705 1665 1605 1510 1425 1340 1185

Low

1355 1330 1300 1245 1170 990 980

AHR60D

High

2034 1955 1858 1753 1640 1522 1296

Medium

1733 1672 1609 1527 1431 1272 1220

Low

1388 1359 1313 1255 1133 1004 912

1. Air handler units have been tested to UL 1995 / CSA 22.2 standards up to 0.30" wc. external static pressure.

Dry coil conditions only, tested without filters.

For optimal performance, external static pressures of 0.2" to 0.5" are recommended. Applications above 0.6" are not recommended.

Airflow data shown is from testing performed at 230V. AHE units use a X13 motor, and there is minimal variation of airflow at other distribution voltage values. The

above data can be used for airflow at other distribution voltages.

AIR FLOW DATA (CFM)

(Continued)