Technical data

3.3 Anchorage
YCWM/YCRM series chillers are provided with
18 mm diameter holes in the base frame for
retaining the unit if required.
3.4 Storage
If the unit is to be stored prior to installation, certain
precautions should be taken to prevent damage,
corrosion or deterioration:
n
Ensure that all openings, such as water
connections, are securely capped or sealed.
n
Do not store where exposed to ambient air
temperatures exceeding 45°C for R22 or 42°C
for R407C units, preferably out of direct
sunlight.
n
Store the unit in a location where minimum
activity is likely to take place to limit the risk of
accidental damage.
n
Do not steam clean the unit.
n Remove the keys necessary to gain access to
the control panel and deposit them with a
responsible person on site.
Periodic visual examination during storage is
recommended.
3-2 035B40022-000