Daim Ntawv Qhia Tus Neeg Siv

To configure the Equalizer on a site with multiple
circuits, use the Easee Installer App.
Ensure that the Equalizer and the master
charger(s) are connected to the same WiFi-
network. Also check that you have NFC enabled
on your mobile phone.
1. Go to Ongoing sites or Update existing
site and select the site you want to add an
Equalizer to.
2. Select Add Equalizer under Site structure.
3. Enter WiFi information (same network to
which the chargers are connected).
4. Hold the front of the Equalizer to your mobile
phone to transmit the WiFi-details. The
Equalizer does not need power to receive this.
5. Connect the Equalizer to the Modbus
adapter.
6. Go to Site settings → Equalizer → Meter type
and select the meter used in your system.
7. For installations with more than one circuit,
it is common (and recommended) to set
an upper limit value for the entire charging
site (eMobility fuse). Go to Site settings →
Equalizer → Max allocated current to enter this.
For support and troubleshooting, please check
our knowledge base by visiting
easee.com/
equalizersupport
or scanning the QR code:
3 Setting up
Equalizer
4
5