User Manual

-10-
10.Manually set the Zooming position
Short press function button [ ],then press [up] [down] [left]
[right] button to adjust coverage, user can adjust the flash coverage
(24,28,35,50,70,80,105,135,200mm)manually.
11.Overheat protection
When continuous flash, the temperature of the flash head may increase, a warning icon [ ] icon will be
displayed on LCD panel, and the recycling time will be longer.
When repeated firings of the flash, the overheat protection function will be triggered, the LCD is lighting in
red, the speedlite will be locked ,in such case, please wait for about 10 minutes before continuing use.
When the speedlite warns overtieating, please reduce the use intensity.
-11-
9.Multi Mode
Multi mode, the speedlite will flash according to the flash output, flash
frequency and number of flashes you set. Use [left][right]to adjust output
power. The adjustment scope of output level is 1/128-1/64-1/32-1/16-1/8-
1/4. To adjust times of flash and flash frequency, please press [ ] first
to enter focal length setting menu, then press [ ] again to select the
item (blink) to be set, at this time, user can adjust times of flash and flash
frequency.
Basic Functions