User Manual

8.M Mode

In M mode, you can set the flash output as your requirement and

adjust the flash output though [left] [right] button. The adjustment

range of flash output is 1/128~1/1.The output can be divided into 8

grades, and each has 1/3 EV as adjustment increment by

. When shooting, you should just set the flash out, the

speedlite will flash with the sync signal from the camera.

[up] [down]

button

6.Power-on and Power-off

Set the power switch to [ON] position, the speedlite will turn on and start

charging.

After turned on, the [Charging lamp] will bright with red light which indicates it

can flash. After use, set the switch to [OFF] position to turn off the power

source.

When the charging lamp turns red, you can test the flash is normal or

through the [TEST] button.

Test Flash

-10-

Basic Functions