Precaution To avoid fire o electrical shock, do not expose this product to rain or moisture. To avoid short circuit, please make sure the batteries contacts are securely packed and use the battery In accordance with the local provisions. Please place the batteries and the parts which can be swallowed mistakenly away from children. If swallowed, please get medical help Immediately. To avoid any possible injury to eyes, do not use the flash in a short distance from the eyes.
Features @ Completely Compatible with XIONGNU §22C and 603 Wireless System SYNGE supports respectively receiving wireless triggering signal from YN622C, YNS60IV, YN560-TX, RF805, RF6031 and RF603. ® Remote Control Off-camera Parameters of Each Group The flash mode, fish intensity, focal length and sync mode (YN622C wireless system only) of the speed-lite in each group can be controlled remotely through YN622C transceiver and YN560IV TYN560-TX. @ YN685 Is a 2.
Uncatalogued P1 Features .Quick Start » epee P4 1 .Components Description +» P5~9 1M1 Preparation .s P10~11 IV. Baslc Functions assess P12~15 'V .Advanced Applications » *» P16~19 VI.Wireless Flash Shooting » =» P20~23 VI. Custom Function Setting »» P24~25 VA.Troubleshooting Guide IX.Specifications In order to get familiar with this product, please read this user manual and take the user manual of the camera and as reference. Icon in this user manual: :minnow of avoiding shooting problems.
1.Quick Start If you don’t have much time to read the whole user manual, we advise you to read this section. 1. Please avoid the excessive user of the output with maximum power. It can effectively extend the service Rife of this product.
IIT. Preparation 1.Install Batteries Slide the [battery compartment cover] In the direction of the mow as shown. Instar the batteries according to the label Inside the battery chamber and make sure the direction of the battery contact is comet. Close the [battery compartment cover] in the direction of the arrow as shown.
Preparation and Power-oft Set the switch to position, the sped-lite Is on and starts charging; after muted on, the Is | bright with red light which Indicates 1t can \k\ flash If the battery prows Is too low, the will be blinking with bis light, the screen displays the low power icon and shutdown automatically. If so, it indicates the sped-lite needs to be replaced with new batteries. After use, set the switch to position to tum off the power source.
IV .Basic Functions KETTLE Mods In ETTA mode, the metering system of this camera will detect flash illumination reflected back from the object so as to automatically adjust the exposure | compensation. In ETTA mode, the light Intonation can be adjusted by sting FEEBLE and exposure lock 2M Mode Short press [MODE] button to switch this spud Site to M mode and you can set fish output according 1o your requirement. The adjustment range of flash output s 1128~11.
Basic Functions range of fish output is the bummer of flashes range and flash frequency range is 1~100. When the number of flashes is set as this speed-lite will keep flashing till the shutter closed or the batteries run out. B when in iow batiste the charging sped of speed e wil be sow, which May cause the sacking of ts stroboscope Thea In this attenuation, ‘sepia reduce the dash frequency or change new batteries. 4.
Basic Functions. 8.Modeling Flash Operate the aperture preview button on the caners, the speed-lite will flash continuously for 1 second. This Is so-called modeling flash. Lassa kappa the number of modeling dashes Under 10 mes; esp the ‘speed iota die for 10 minutes or more after the: continuous: use ‘of modeling dashes o pervert tis sifted from overhearing or burning-out. 9.PC Sync Port (input) 'TOYNBEE is equipped with standard PC sync port.
'V .Advanced Applications Sync Flash With high-speed sync (FP flagella, the flash can be synchronized with all shutter speeds, the maximum shutter sync Is up to 1/8000. High-speed synchronization Is particularly convenient to use aperture priority to fill flash for the portralts. Short press the function button [ SYNC] to tum on or off the high-speed synchronous flash,when the function enabled the flash screen will display < @B >icon.
‘Advanced Applications 4.Exposure Bracketing (FEB) The exposure bracketing can be set within the range of —SEVER 3EV and Increment with 1/3 or 1/2EV through the speedily or camera After the exposure bracketing belong set, after every 3 photos being taken, exposure compensation wil be made automatically, for example,exposure in the sequence of “normal— under—over”. This function helps you improve the success rate of photo taking.
Advanced Applications. 8.The Flash Range Setting You can set the flash range to “Auto zoom™When set to “Auto Zoom" the flash will automatically adjust the flash range according to the focal length when set to “Manual can set the flash range between 20mm ~ 200mm Short press the button to choose the flash range value,then adjust the flash range through the [Select Dial ,press the [ OK] button to save settings.The icon < >means auto zoom,while the icon < @ > means manual zoom.
Advanced Applications shade behind the object can be lightened to get X or wall fo light the desired object.So that the [ 7 more natural shooting effect. teal] o polling i8 too far, he bouts fish may ba loo weal o get enough exposures: The wall or selling sideshow be ever and wilt In deserts gat officiant rarefaction: Hf the reflection surface s not whits, ‘coral cast may appear In photo. 10.
Wireless Flag Shooting through the [Dial] can adjust the channel,press the [OK] button for saving. Short press the function button [Gr] can directly switch the grouping from slave unit. You can choose YN685 as default remote control mode(622 REMOTE)or mix mode(622 MIX) through the master unit. MULTI® o a6 192 TEH.
Windlass Flag Shooting 'TOYNBEE can receive the wireless trigger signal from YNS60 IV / respactivelyrealize off-camera M Multi fish or not participate in flash. When the TOYNBEE in the RFB03 wireless trigger system,there are total 16 channels and 6 groups for option.Short press the function button [Gr] can switch the grouping directly;through short pressing the function button [CH] could enter info the channel setting state,through the [Dial] can adjust the channel,short press the [OK] button for saving.
Wireless Fish Shooting Group setting: Set the coyness to any two groups of group HERBICIDAL respectively. The flash parameters setting of slave unit: If the slave unit set to 622 remote control mode,then through the master unit or camera menu to remote control the flash mode fish output synchronization method and flash range of each group for slave unit If the slave unit set to 622 mix control mode or RF603 trigger mode,then you can set the flash mode ,flash output and flash range on the slave unit.
VI. Custom Function Setting You can custom the fish function according to your requirement. Long press the function button [Zm/CFnl to enter into the custom function menu,rotate the [Select Dial to select the custom function as C.
‘Custom Function Setting C. Fn 11 Stave auto power off timer 0:8h Soave auto power off within 8 hours 1:1h Soave auto power off within 1 hours €. Fn 20 Sound prompt 0. OFF Tum off sound prompt 1: ON Enable sound prompt ©Fn 23 LD fightback 0:12sec The display time of LCD back light is 12 seconds 1: OFF Tum off the background light 2: ON Background light long on ©. Fn 24 Off-camera trigger mode 0: 622C 1: RF603 2: 622C/RF603 C.
VI.Troubleshooting Guide 1.Unable to turn on the power source or unable to flash Please ensure the battery in correct installation;Ensure the hot shoe contact between flash and camera are in good contact,Please clean the contact If the hot shoe contact of flash and camera got dirty. 2.The flash automatically shut off the power Please check if the flash enable the power saving mode or whether the battery power is enough. 3.
Troubleshooting Guide heather abnormal phenomenon Try to clear the settings of fish and camera;try to disable the flash power source and then restart the flash. If the problem still not be solved,please contact to XIONGNU afire-sale service center with hot line 400-001-3888.
IX.
