User's Manual

The Other YN-622C User Guide
14/09/2012 Page 8 of 18
CANON FLASH CONTROL MENUS
The camera’s flash control menus are the main interface for using the 622s. Finding details about
the Canon menus can be hard, so this section might help. The menus change interactively as
selections are made. The 622 controls or disables some menu items, and different cameras have
menu variations. For 5D III, 650D and other new models, select the optical pulse transmission
menu instead of the wireless function.
Starting menu item
• Flash Control (or External Speedlite Control)
First menu
• Flash Firing Enable or disable the 622 transmitter.
• External flash func.setting 622 is identified as an external flash.
• External flash C.Fn setting FEB auto cancel – locked Enabled.
FEB sequence – locked.
AF-assist beam firing – Enabled or Disabled.
• Clear ext. flash C.Fn set. ***
External flash function menu
• Flash mode E-TTL II, Manual, MULTI. (TTL, Auto external, Manual external disabled.)
• Shutter sync 1st curtain, 2nd curtain (if Wireless Disabled), Hi-speed
• FEB 6 stops in range -6 to +6. Interacts with FEC.
• FEC Flash FEC -2 to +2 (later cameras -3 to +3). Interacts with on-flash settings.
• E-TTL II Evaluative, Average
• Zoom Auto, 24 28 35 50 70 80 105mm (later cameras 200mm)
• Wireless Enable, Disable
• [INFO] Clear Speedlite settings. ***