User guide
The Other YN-622C User Guide
17 | P a g e o f 23
CAMERA FEATURES
Ambient-only shot
Turn transmitter off. 622 settings are remembered when powered up again.
Or, use type A camera menu Flash Firing – Disable.
High-speed Continuous Shooting
Trigger keeps up with camera. (Tested at 6.5 fps.)
A Flash battery pack is recommended for maintaining flash output consistency.
Live View
Silent Mode must not be enabled, as Canon then prevents flash from firing.
Modelling Light
Works as designed. All flashes fire, including on-top flash.
FLASH FEATURES
Flash Zoom (Flash Coverage)
Canon provided a flash head zoom to provide lighting just wide enough to cover the lens’s field of view. Consider the
zoom as a light modifier, for efficiency or artistic reasons, or because the flashes may be off-camera and lens zoom is
irrelevant. The 622 provides more flexibility than Canon’s implementation. This may be affected by Canon’s rules - Wide
panel extended: 14mm;Head in Bounce on Auto: --mm; Head in Bounce on Manual: as set; Auto-adjust for sensor size
enabled.
Zoom Lock
An individual flash under remote control can have its zoom setting locked so that it is not controlled by the camera’s
zoom menu setting.
Hold down [CH SET] on a 622 Receiver for several seconds until the channel indicator stays lit. (This is the same as
setting mix control on a transmitter.)
Adjust the flash zoom setting with the flash control panel (automatic or manual).
Hold down [CH SET] for several seconds to cancel. The channel indicator will go out.
Zoom and Remote Control
Remote Control – camera zoom settings apply. Auto; Manual 24 to 105mm (or 200mm).
With automatic setting, focal length of the flash may change with lens focal length.
With manual setting, focal length of the flash supports manual setting within 24-105MM.
Zoom and Mix Control
The camera’s zoom menu setting is disabled.
Set each flash’s zoom setting on-flash – Auto, Manual 24 to 105mm (or 200mm).
LCD display
Flash zoom, focal length, ISO, shutter speed, FE Lock, HSS indicators change with settings.
Pilot Indicator
Individual test fireworks.