Product Instruction Model：TT-300 Please read the instruction carefully before using, Pictures for reference only
Content 1．Security cautions.................................................................1 2． Quality Assurance Commitment........................................2 3．Configuration list and technical parameters........................3 4．Product parts.......................................................................3 5．Assembly instructions..........................................................5 6．Instructions for use..............................................................
Thank you for purchasing our product, our products will help to improve your health. 1. Security cautions In order to ensure your safety and avoid accidents, please read the instructions carefully before use. This product is indoor use only, please do not make it or use it outdoors; the treadmill should be placed in a flat and clean position, do not put it in a thick carpet or near water area, there should be 3-6ft barrier-free safety area behind the treadmill.
The followings are not covered by the warranty: Damage caused by external factors. Use non-original accessories. Privately handled incorrectly. Not follow the instructions. This pledge is valid only for private use by families and is not applicable to professional training such as gyms. If you need to buy non-warranty accessories, please contact customer service. Please provide the following information when ordering: Instructions. Product model. Fittings serial number.
2. Technical parameters Para name Parameters Packing dimension 60.82*29.92*6.4 inch Folded dimension 58.66*28.86*4.9 inch Unfolded dimension 54.33*28.86*43.9 inch Running area 17*42.52 inch maximum power 550 W Speed range 0.6-7.6 MPH Max capacity 240LBS Net/Gross weight 65.1 /77 LBS 4.
5. Assembly instructions Assembly steps Step 1: Column armrest assembly OPEN LOCK tight 1. Open the packing box, remove the relevant accessories and machine from the box, and place the machine on flat floor, without assembly 2. To lift up the handle to can’t be removed anymore 3. Hold the column tube with one hand and turn the lock switch back and forth in one hand, and hit the OFF position (the left and right sides operate the same). Column armrest 4.
Folding steps Step 1: fold the handle down to the plate LOCK OPEN loose 1. Hold the column tube with one hand, and turn the lock switch forward in one hand, and hit the ON position (the left and right sides operate the same) 2. Push the iPad bracket to the OPEN direction, rotate it inward, and then release it to LOCK to limit it. Step 3: Hold the column tube with your hand and fold it back to lay it flat Machine folding completed 6.
7. Function description Dashboard function Bluetooth mark Speed,calorie Start/stop display window increase speed and Time, distance display window decrease knob Operation function： Turn on the power, all windows will light up for 2 seconds, and then enter the standby state.
Mobile phone Bluetooth music connection operation Open the Bluetooth search address from “maxfree 00001 to 65000” numbers: for example: search for the number in the address " maxfree 00008" and click on the maxfree 00008 Bluetooth icon If the next step is paired or the password appears, just enter 0000 and click on the pair. Pairing success Note: Bluetooth music will be automatically connected next time after the first connection to Bluetooth.
2. Stretch your ankles: Sit on a clean cushion and straighten one leg. Put the other leg inward so that it is close to the straight leg. Try to touch your toes with your hands. Figure 2 Keep it for 10 to 15 seconds. Then relax. Repeat each leg three times。 Figure 2 3.
◆ Running with a left bias Tigh Adjustment method: With the power turned off, take a 5mm hexagon wrench and turn the right rear roller bolt 1/4 turn to the right to tighten the running belt. Then the machine is powered on and the test running belt is centered. Follow this method until the running belt is loosely adjusted to the center.
2. Add lubricating oil to the walking machine The walking machine is lubricated when it leaves the factory. But it is necessary to check the lubricity of the treadmill frequently, which will help the treadmill to be kept in the best condition. The treadmill must be lubricated after half a year of use or 80 hours of operation. After every 30 hours or 30 days of use, pull the starting belt from the side and reach out to touch the surface of the treadmill as much as possible.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
