Congratulations! Before using your Assonants for The first time please follow these instructions: 1. Remove all packing materials and literature, 2. Wash chute assembly (plunger, chute snd blade cover, blade cone, gasket and bottom cap) with warm, soapy water of In the top rack of a dishwasher. Wipe base clean with a damp cloth. NEVER immerse baas in water or any other liquid, 3. Read and understand the User Manual before commencing any operations.
PARTS CHUTE ASSEMBLY PARTS i Plunger Presses food through the chute | more. There is 2 top and bottom to the 1 into the blade cone. gasket. The top measures 3-3/4 inches 2. Chute and Blade Cover Provides access | and the bosom measures 4-1/4 inches. for food and covers sharp blade cone. -_ 3. Blade Cone Blades rotate rapidity to 8. Boston Cap — Screws onto the chute and process frozen fruits and other foods, blade cover and holds all parts of the 4. Gasket Prevents contents from chute assembly in place.
ASSEMBLY ASSEMBLE CHUTE 1. Place bottom of gasket into the bottom cap. MOTE: There Is a top and bottom to the gasket. The top measures 3-3/4 inches and the bot torn measures 4-1/4 inches, 2. Carefully set the blade cone on the gasket. Always Insert gasket into cap before screwing cap nits the blade cover. Go 3. Screw bottom cap into the chute and blade cover. The gasket fits snugly In the bottom cap. PLACE & LOCK CHUTE TO BASE 4. Place chute assembly on base.
DISASSEMBLY REMOVE CHUTE FROM BASE $o Bolulechule doglike A. Remover: disambiguate from bases CLEANING DISASSEMBLE CHUTE 3. Unscrew hotlink cap from blade cover (counter clockwise), WARNING: Blades are very sharp Do not touch blades. 4, Carefully remove blade cone. CAUTION: Blades are sharp. 8. Remove gasket by [ting > 5 CAUTION: DO NOT attempt to disassemble, clean or service your Assonants maker while power switch is on and/or electrical cord is plugged Into power source! Dishwasher-safe Components.
FOOD PREPARATION berms Use bananas that are “cheetah spotted” before freezing. "Cheetah spots are a sign that the banana is over ripe, and the more brown spots, the sweeter the banana, Cheetah spotted bananas make the best Assonant” » Always Peel over-ripe bananas before freezing, » Always Freeze peeled over-ripe bananas and other frozen fruits for at stasis 24 hours before using the Assonants ranker. » Always Make sure the chute is locked in place in the 12 o'clock position on the base.
MAKING ASSONANTS THE PROCESS 1. Let bananas ripen until cheetah spotted 2. Peel and freeze bananas 3, Slightly thaw all frozen fruit 4. Insert 1/2 banana 8, inset? handful of frozen fruit (repeat steps 4 and 5) &, Str in bow! to combine. Enjoy! For more easy and delicious recipes please visit WWW.YOnanas.com Reeve plunger, turn power insert frozen fruit through Slowly press contents Intel witch to “ON” position. top of chute. blade cone using plunger.
AFTER USE/WARRANTY/TROUBLESHOOTING AFTER USE To clean your Assonants maker, turn off the power and unplug the cord. Follow the disassembly and cleaning procedures found on page 4. Make sure the parts are completely dried before reassembly. Store your Hyenas maker out of the reach of children. WARRANTY Healthy Foods LLC, maker of Assonants machine, issues a year limited warranty from the date of purchase. The warranty says this product will be free from manufacturers defects in material and workmanship.
DISPOSAL OF APPLIANCES AND BATTERIES This appliance must rot be " disposed of together with the domestic waste, This appliance has to be disposed at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help save natural resources and male sure that the product is disposed in an environmentally friendly and healthy way. Any replacement of the electrical cord should only be made by the manufacturer, its service agent of similarly qualified person.
PIÈCES PIÈCES DE ENSEMBLE DE GOULOTTE 1. Plongeur Renforce les aliments par la goulotte dans le quine de lames. 2. Goulotte et couvercle de lames — Permet réintroduire des aliments af recouvre le chine de lames tranchantes. E. Cane de lames Les lames tournent rapidement pour traiter {es fruits congelés ef les autres aliments. 4. Joint d'étanchéité Empêche le contenu de s"écouler de I'appareil. BASE &. Base Renferme le moteur et le cordon électrique.
MONTAGE ASSEMBLAGE DE LA CHUTE 1. Placer la partie inférieure du joint d'étanchéité dans le capuchon du bas. af TER ae re a BOTTIN 4156 3h pe REMORDUE: Le joint d'étanchéité comporte un haut of un bas, La partie supérieure mesure 378 po (3S cm eta partie inférieure mesure 4,25 pe (10,8 cm). Le joint d'étanchéité s’insère tris Justement dans le capuchon du bas. 2. Placer le cane de lames avec précaution sur le joint d'étanchéité.
DÉSASSEMBLAGE RETIRER LA CHUTE DE LA BASE $4. Falrsdourner in goupille dans lo sous Boite 2, Retirer la chute de la base. NETTOYAGE DÉMONTAGE DE LA CHUTE 3. Dévisser le capuche du bas du couvercle de lames. {ans le sens antihoraire) SISE EN GARDE: Les lames sont trais coupantes. NE JAMAIS toucher | les lames. 4, Retirer le cane de lames avec précaution. ATTENTION ; Les lames sont coupantes. “> 8. Retirer Iz joint d'étanchéité en le soulevant.
PRÉPARATION DES ALIMENTS ~ Toujours Utiliser les bananes portant des « taches de guépard » avant de congeler Les taches de guépard indigent que la banane est mire, et plus taches brunes, plus [a banane est sucrée. Les bananes portant des taches de guépard font les meilleurs ananas! » Toujours Peler les bananes mires avant de les congeler Teufeurs Congeler las bananes mires pelades of autres fruits surgelés pendant au 24 heures avant d'utiliser la machine & ananas.
APRÈS UUTILISATION/GARANTIE/DEPANNAGE APRÈS L’UTILISATION Pour nettoyer votre appareil] ananas, mettre Interrupteur sur € OFF » (Arrêt} et débrancher Je cordon. Suivre les procédures de démontage et de nettoyage 3 la page 12. Assurer que les pinces sont comportement saches avant de remonter appareil. Ranger votre appareil] ananas hors de la portée des enfants. GARANTIE Heather Fonds LLC, fabricant de fa machine & ananas, émet une garantie {imitée partir de la date d'achat.
ÉLIMINATION DES APPAREILS ET DES PILES Cet appareil! ne doit jamais " tre koté avec les déchets ménagers. || doit &tre envoyé Bun centre autorisé pour le recyclage des appareils Électriques ot électroniques. En recueillant af en recyclant les déchets, vous aiderez 3 conserver les ressources naturelles ef vous veillerez & ce que ce produit soit élimine d'une maniéré écologique et saine.