Installation Manual

HIP2P IP Camera Client User Manual
第
12
页 共
29
页
Right-click on any area and it will pop up as shown on the right:
【Connect all】 Connect the device in the selected area
【Start area manual recording】 Enable manual recording of the device in the selected area
【Stop area manual recording】 Stop manual recording of the device in the selected area
【Picture quality】Choose different picture quality according to different network environments:
HD and SD
【 All Auto-adjust screens 】 The selected area device adjusts the screen display ratio
automatically
【All Full screen display】 The selected area device displays the image according to the size
of the split screen
Note: After the image stopped display, the device is still connected. If the device has started the
recording function, the device will still keep recording after stopping the display.
2.5. PTZ control
2.5.1. PTZ control
You can control the 8 directions of the PTZ by using the direction keys; select the speed of the
PTZ by dragging the slider. "-" indicates that the rotation speed of the PTZ is slower, and "+"
indicates that the rotation speed of the PTZ is faster.
Aperture zoom in button, requires lens
support to be effective
Aperture zoom out button, requires
lens support to be effective
Focus bigger button, requires lens
support to be effective
Focus smaller button, requires lens support to be effective
Focus forward button, requires lens support to be effective
Focus backward button, requires lens support to be effective
2.5.2. Preset setting
The client supports maximum 256 presets.
For details on how many presets can be used,
please refer to the description of the number