Installation Manual

HIP2P IP Camera Client User Manual
第
10
页 共
29
页
【Add device】
◆Search and add devices in LAN：
Click the search button,the client will search out all the devices in the LAN at this time, then
select the devices to be added in the search list. After selecting the area, click the button
to add the device, it can add the selected device to the area.
◆ Add devices manually：
Click the button to pop up a dialog box for adding a device, as shown below:
【UID】 Device UID code, each device has a different UID code
【Name】 The name of the device can be self-defined. The device name can be entered
max 15 Chinese characters. (Note: After entering the name, only the name
of the device is displayed on the device tree in the preview window, not
display the UID of the device)
【User name】 User name of the device, default is admin
【Password】 password of the device, default is admin
【Area】 display area of the device
Fill in the required information and click the OK button to complete the device addition.
2.4. Image preview
After configuring the device, click the "Preview" tab in the tab bar to return to the monitoring
main interface. The device tree is displayed as a list tree by default. Click "Group" and "List" on
the device tree to switch between group and list information.
The display screen defaults to 4 screen division display, and supports maximum 36 screen
divisions.
The maximum screen division is optional. There are three screen modes of 16/25/36.The higher
the screen, the higher the performance of the host required. The 25 or 36 screen display is