User Guide
Table Of Contents
- Service Guarantee
- 1.Introduction
- 2.Installation
- 3.SD Card Slot
- 4.APP Download
- 5.Mobile APP CamHipro Connection
- 5.2 Connect to IP Camera Hot-Spot and then Configu
- 5.3 Add Camera
- 5.4 Wi-Fi Setting
- 5.5 Connect the Camera by Search Nearby Devices
- 5.6 Mobile APP Function Introduction
- 5.6.1 Micro SD Card Video files playback and downl
- 5.6.2 Local files, device list and add other new c
- 5.6.3 Pre-set point and auto cruise (For PTZ)
- 5.6.4 Change password
- 5.5.5 Set factory of the camera
- 5.6.6 Alarm management and notification
- 5.6.7 Motion Detection
- 5.6.8 Email settings
- 5.6.9 FTP setting
- 5.6.10 Video setting and audio setting
- 5.6.11 SD card plan recording
- 5.6.12 Device time setting
- 5.6.13 SD card setting
- 5.6.14 Default setting
- 6.Computer Browsing Access
- 7.Video Management Software (HIP2P Client)
- Frequently Asked Questions
- 7 -
Step 4 Step 5 Step 6
Step 7 Step 8 Step 9
5.2 Connect to IP Camera Hot-Spot and then Configure Wi-Fi
Go to your cell phone’s Wi-Fi Setting -- search Wi-Fi signals -- connect the Wi-Fi.
The name of Wi-Fi Hot Spot is the UID on the camera (Wi-Fi name:IPCAM-900139)
Camera default Wi-Fi Hot Spot password: 01234567
Remark: Only when the mobile phone is 3-5 meters away from the camera can the hot spot signal be
detected,please close the mobile data when connect the camera Hot Spot.