User Guide
Table Of Contents
- Service Guarantee
- 1.Introduction
- 2.Installation
- 3.SD Card Slot
- 4.APP Download
- 5.Mobile APP CamHipro Connection
- 5.2 Connect to IP Camera Hot-Spot and then Configu
- 5.3 Add Camera
- 5.4 Wi-Fi Setting
- 5.5 Connect the Camera by Search Nearby Devices
- 5.6 Mobile APP Function Introduction
- 5.6.1 Micro SD Card Video files playback and downl
- 5.6.2 Local files, device list and add other new c
- 5.6.3 Pre-set point and auto cruise (For PTZ)
- 5.6.4 Change password
- 5.5.5 Set factory of the camera
- 5.6.6 Alarm management and notification
- 5.6.7 Motion Detection
- 5.6.8 Email settings
- 5.6.9 FTP setting
- 5.6.10 Video setting and audio setting
- 5.6.11 SD card plan recording
- 5.6.12 Device time setting
- 5.6.13 SD card setting
- 5.6.14 Default setting
- 6.Computer Browsing Access
- 7.Video Management Software (HIP2P Client)
- Frequently Asked Questions
- 39 -
C） Click “Search” to find IP Camera in the LAN, Select the camera click “add” to Add camera.
D） Double Click camera’s UID to modify camera’s password. (Applicable after the camera is added to wifi,
or after the camera has been connected to the network by cat5/6. You can access your camera
anywhere by internet.).