User Guide
Table Of Contents
- Service Guarantee
- 1.Introduction
- 2.Installation
- 3.SD Card Slot
- 4.APP Download
- 5.Mobile APP CamHipro Connection
- 5.2 Connect to IP Camera Hot-Spot and then Configu
- 5.3 Add Camera
- 5.4 Wi-Fi Setting
- 5.5 Connect the Camera by Search Nearby Devices
- 5.6 Mobile APP Function Introduction
- 5.6.1 Micro SD Card Video files playback and downl
- 5.6.2 Local files, device list and add other new c
- 5.6.3 Pre-set point and auto cruise (For PTZ)
- 5.6.4 Change password
- 5.5.5 Set factory of the camera
- 5.6.6 Alarm management and notification
- 5.6.7 Motion Detection
- 5.6.8 Email settings
- 5.6.9 FTP setting
- 5.6.10 Video setting and audio setting
- 5.6.11 SD card plan recording
- 5.6.12 Device time setting
- 5.6.13 SD card setting
- 5.6.14 Default setting
- 6.Computer Browsing Access
- 7.Video Management Software (HIP2P Client)
- Frequently Asked Questions
- 22 -
Click on the capture and take the current image.
Local manual recording.
Video Recording playback: Click the playback, select
the date and time, select the local playback or SD card
playback, search the video files and double click on
the file to play.
Region C
PTZ control operation interface, control the camera to
rotate horizontally and vertically.
Control the camera zoom in/out, focus +/-, left / right
and up / down cruise.
Adjust the camera rotation speed and presetting point
settings: Select presetting point 1, the camera rotates
to the screen you want to monitor, click on the setting
to set the preset point. Type 41 in Presetting to call the
command of auto cruise.
6.5 Parameter Settings
6.5.1 SettingMedia
Video: Set the video format, video coding, resolution, bit rate, max frame rate, key frame interval, bit rate
control and image quality.