User Guide
Table Of Contents
- Service Guarantee
- 1.Introduction
- 2.Installation
- 3.SD Card Slot
- 4.APP Download
- 5.Mobile APP CamHipro Connection
- 5.2 Connect to IP Camera Hot-Spot and then Configu
- 5.3 Add Camera
- 5.4 Wi-Fi Setting
- 5.5 Connect the Camera by Search Nearby Devices
- 5.6 Mobile APP Function Introduction
- 5.6.1 Micro SD Card Video files playback and downl
- 5.6.2 Local files, device list and add other new c
- 5.6.3 Pre-set point and auto cruise (For PTZ)
- 5.6.4 Change password
- 5.5.5 Set factory of the camera
- 5.6.6 Alarm management and notification
- 5.6.7 Motion Detection
- 5.6.8 Email settings
- 5.6.9 FTP setting
- 5.6.10 Video setting and audio setting
- 5.6.11 SD card plan recording
- 5.6.12 Device time setting
- 5.6.13 SD card setting
- 5.6.14 Default setting
- 6.Computer Browsing Access
- 7.Video Management Software (HIP2P Client)
- Frequently Asked Questions
- 20 -
Note:Through the search tool you can find all IP camera in your local area network, and can modify th
e basic configuration of the camera such as: IP address, user and password, camera name, etc...
You can also access the camera through the browser (recommended IE browser), in the browser you
can test the camera and configure all the settings of the camera.
.
6.2 Search IP Camera
Click “next” to find IP camera. You can select Network Card to search IP Camera.