User Guide
Table Of Contents
- Service Guarantee
- 1.Introduction
- 2.Installation
- 3.SD Card Slot
- 4.APP Download
- 5.Mobile APP CamHipro Connection
- 5.2 Connect to IP Camera Hot-Spot and then Configu
- 5.3 Add Camera
- 5.4 Wi-Fi Setting
- 5.5 Connect the Camera by Search Nearby Devices
- 5.6 Mobile APP Function Introduction
- 5.6.1 Micro SD Card Video files playback and downl
- 5.6.2 Local files, device list and add other new c
- 5.6.3 Pre-set point and auto cruise (For PTZ)
- 5.6.4 Change password
- 5.5.5 Set factory of the camera
- 5.6.6 Alarm management and notification
- 5.6.7 Motion Detection
- 5.6.8 Email settings
- 5.6.9 FTP setting
- 5.6.10 Video setting and audio setting
- 5.6.11 SD card plan recording
- 5.6.12 Device time setting
- 5.6.13 SD card setting
- 5.6.14 Default setting
- 6.Computer Browsing Access
- 7.Video Management Software (HIP2P Client)
- Frequently Asked Questions
- 14 -
Auto Cruise Function:
Number 1-16 means 16 points you want to set up
Adjust the camera rotation to the first point you want to monitor on the app; input "1" and Setting;
Adjust the camera rotation to the second point you want to monitor on the app; input "2" and Setting;
……until set up 16 points……
After you set up 16 points, input "41" and transfer. The camera will auto cruise.
Input "41" and Setting, auto cruise will stop
5.6.4 Change password
Click “Change Password” to modify the password. Old password:admin