Installation Guide
Table Of Contents
D-5. Installaon Methods (Outdoor Electrical Juncon Box)
Please refer to device environmental operang range informaon on page 31. Use this device outside the
recommended ranges at your own risk
Example of installaon instrucons for a
commerci al si re n or s iren/st robe. Pl ease
note the juncon box. this is where the wire
and connecons/splices would be protected
1. Please refer to device dimensions informaon
on page 33
2. Your Outdoor Alarm Controller is an RF
wireless device which ideally is not installed on
or near metal. If the device is intended for
installaon in a metal box, please first test the
locaon by placing the device in the box and
installing the cover. On the app, verify the
device is online, and on the device detail screen
that signal level is not indicated as “Weak” (see
illustraon below). The signal level may be
improved by ulizing a plasc cover on a metal
box. Otherwise, a plasc box will be required to
ensure reliable operaon
Outdoor
Electrical
Juncon
Box
15