User Manual

Avoid allowin
g
the hub to be ex
p
osed to stron
g
im
p
acts or vibration, which ma
y
dama
g
e the device, causin
g
malfunctions or failure
Please do not use strong chemicals or cleaning agents to clean the hub. Please use a clean, dry cloth to wipe the hub to
avoid dust and other foreign elements entering the Hub and affecting the operation of the Hub
N
Warnings
Power the Hub with the provided adapter, only
The hub is designed and intended for indoor use and is not waterproof. Install indoors, avoiding subjecting the Hub to
water or damp conditions
Do not install the hub inside or near metals, ferromagnetism or any other environment which may interface with the
signal
Do not install the Hub near flames/fire or expose to high temperatures
Frequency:
LoRa: 923.3 MHz
WiFi: 2412 - 2462 MHz
Dimensions: 4.33 x 4.33 x 1.06 Inches
Environment:
-4° - 104°F (-20° - 50°)
Humidity: <90% Condensing
Figure 1
M
Specifications
Hub: 5 Volts DC, 1 Amp
L
Firmware Update
Your YoLink products are constantly being improved, with
new features added. It is periodically necessary to make
changes to your device's firmware. For optimal performance
of your system, and to give you access to all available features
for your devices, these firmware updates should be installed
when they become available
1
Refer to Figure 1. An update is available, as indicated by the
"#### ready now" information
2
Tap on the revision number to start the update
3
The device will update automatically, indicating progress in a
percentage complete. You may use your device during the update,
as the update is performed "in the background". The feature
indicating light will slowly blink red during the update, and the
update may continue for several minutes beyond the light turning
off