User's Guide

The Set WiFi screen appears as shown.
Connect Hub to WiFi, Continued
K
As directed in the app, press the hub’s SET
button for more than 10 seconds or until the
WiFi LED flashes rapidly. (The LED will start
flashing slowly at around 5 seconds; keep
pressing)
Go to your phone’s WiFi settings and log into the
SpeakerHub hotspot. The hotspot can be
identified by the number that starts with
“YS_1604”
Connect Hub to WiFi, Continued
K
Please review the instructions on the screen. After
pressing the SET button the SpeakerHub, you will
then log into the SpeakerHub’s hotspot. This will
need to be done with no delays between steps,
otherwise the Hub will exit AP pairing mode.
4
5
6
15 16
3
Do not change SSID and password at this time.
Tap Set up WiFi via wireless hotspot