Manual

9-8
<Toc> <Ind> <9. CONFIGURATION SERVICES>
IM 21B04C50-01E
9.3 Configuration - Actuator
This is the setup page related to the valve actuator and diagnostics limit information con-
tained in Transducer(TB) block.
Figure 9.4 Configuration - Actuators
9.3.1 Valve Action
This is the ACT_FAIL ACTION parameter.
● Air To Open
It specifies the final failure position of the actuator as air-to-open.
● Air To Close
It specifies the actuator as air-to-close.
9.3.2 Actuator Type
This is the ACTUATOR TYPE parameter.
● Single Acting
It specifies the actuator as single acting type.
● Double Acting
It specifies the actuator as double acting type.