User Manual
<Appendix 5. Link Master Functions>
A5-7
IM 01C50T02-01E
Sub-
index
Element
Size
[bytes]
Descrip-
tion
1 SlotTime 2 V(ST)
2 PerDlpduPhlOverhead 1 V(PhLO)
3 MaxResponseDelay 1 V(MRD)
4 FirstUnpolledNodeId 1 V(FUN)
5 ThisLink 2 V(TL)
6 MinInterPduDelay 1 V(MID)
7 NumConsecUnpolledNodeId 1 V(NUN)
8 PreambleExtension 1 V(PhPE)
9 PostTransGapExtension 1 V(PhGE)
10 MaxInterChanSignalSkew 1 V(PhIS)
11 TimeSyncClass 1 V(TSC)
(8) DlmeBasicInfo
Sub-
index
Element
Size
[bytes]
Description
1 SlotTime 2 Indicates the
capability value
for V(ST) of the
device.
2 PerDlpduPhlOverhead 1 V(PhLO)
3 MaxResponseDelay 1 Indicates the
capability value
for V(MRD) of
the device.
4 ThisNode 1 V(TN), node
address
5 ThisLink 2 V(TL), link-id
6 MinInterPduDelay 1 Indicates the
capability value
for V(MID) of
the device.
7 TimeSyncClass 1 Indicates the
capability value
for V(TSC) of
the device.
8 PreambleExtension 1 V(PhPE)
9 PostTransGapExtension 1 V(PhGE)
10 MaxInterChanSignalSkew 1 V(PhIS)
(9) PlmeBasicCharacteristics
Sub-
index
Element
Size
[bytes]
Value Description
1 Channel
Statistics
Supported
1 0 Statistics
data are not
supported.
2 Medium
AndData
Rates
Supported
8 0x49 00 00 00 00 00 00 00 Wire
medium,
voltage
mode,
and 31.25
kbps are
supported.
3 IceVersion 2 0x0403 IEC 4.3 is
supported.
4 NumOf
Channels
1 1
5 Power
Mode
1 0 0: Bus-
powered;
1: Self-
powered
(10) ChannelStates
Sub-
index
Element
Size
[bytes]
Value Description
1 Channel 1 1 0x00 In Use, No Bad since last
read, No Silent since last
read, No Jabber since
last read, Tx Good, Rx
Good
2 Channel 2 1 0x80 Unused
3 Channel 3 1 0x80 Unused
4 Channel 4 1 0x80 Unused
5 Channel 5 1 0x80 Unused
6 Channel 6 1 0x80 Unused
7 Channel 7 1 0x80 Unused
8 Channel 8 1 0x80 Unused
(11) PlmeBasicInfo
Sub-
index
Element
Size
[bytes]
Value Description
1 InterfaceMode 1 0 0: Half duplex;
1: Full duplex
2 LoopBackMode 1 0 0: Disabled;
1: MAU; 2: MDS
3 XmitEnabled 1 0x01 Channel 1 is
enabled.
4 RcvEnebled 1 0x01 Channel 1 is
enabled.
5 PreferredReceive
Channel
1 0x01 Channel 1 is used
for reception.
6 MediaType
Selected
1 0x49 Wire medium,
voltage mode,
and 31.25 kbps
are selected.
7 ReceiveSelect 1 0x01 Channel 1 is used
for reception.